Yamaha RX-V1300 Manual download pdf (Page 33)

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

BASIC PLAYBACK

Input Modes and Indications

This unit comes with various input jacks. You can set the

priority of the input signal among different types of input

signals.

Press MODE (the input selector button that

you have pressed to select the input source

on the remote control) repeatedly until the

desired input mode is shown on the front

panel display and on the video monitor.

AUTO: In this mode, the input signal is

automatically selected in the following

order:

1) Digital signal

2) Analog signal

DTS: In this mode, only the digital input signal

encoded with DTS is selected even if

another signal is input at the same time.

ANALOG: In this mode, only the analog input signal is

selected even if a digital signal is input at

the same time.

Notes

• If digital signals are input from both the COAXIAL and

OPTICAL jacks, the digital signal from the COAXIAL jack

has precedence over the OPTICAL jack.

• In playing the disc encoded with Dolby Digital or DTS on

some LD or DVD players, the sound output delays for a

moment when playback resumes after a search because the

digital signal is selected again.

• When playing the LD source that has not been digitally

recorded, the sound may not be output for some LD players. In

this case, set the input mode to ANALOG.

• When AUTO is selected, this unit automatically determines the

type of signal. If this unit detects a Dolby Digital or DTS

signal, the decoder automatically switches to the appropriate

setting.

• When you turn on the power of this unit, the input mode is set

according to “8 INPUT MODE” on the SET MENU (see page

62 for details).

MODE

VCR DVD TUNER CD

PHONO

CD RV AUX 1

VCR2/DVR

CBL

SAT

TAPE

VOLUME

DVD AUTO

PHONO

AUX

TV/LD VCR2/DVRVCR 1 DVD

CBL/SAT MD/TAPE CD-R

TUNER CD

Remote controlFront panel

Input mode

■ Notes on the digital signal

The digital input jacks of this unit can handle up to a

96 kHz sampling digital signal. Both OPTICAL and

COAXIAL input jacks can be used to input the digital

signal up to 48 kHz. However when inputting a higher

digital signal than 48 kHz, be aware of the following

points.

• DSP programs cannot be selected. Sound will be output as

normal 2-channel stereo sound from only the left and right

main speakers.

• Use the coaxial input (COAXIAL IN) jack to input over

96 kHz digital signals. The signals may not be correctly played

back if the optical input (OPTICAL IN) jack is used.

• Level adjustment for effect speakers other than a subwoofer is

not possible.

■ Notes on playing DTS-CD/LDs

• If the digital output data of the player has been

processed in any way, you may not be able to perform

DTS decoding even if you make a digital connection

between this unit and the player.

• If you play a source encoded with a DTS signal and

set the input mode to ANALOG, this unit reproduces

the noise of an unprocessed DTS signal. When you

want to play a DTS source, be sure to connect the

source to a digital input jack and set the input mode to

AUTO or DTS.

• If you switch the input mode to ANALOG while

playing a source encoded with a DTS signal, this unit

reproduces no sound.

• If you play a source encoded with a DTS signal with

the input mode set to AUTO;

– This unit automatically switches to the DTS-

decoding mode (The “t” indicator lights up.)

after having detected the DTS signal. When playback

of the DTS source is completed, the “t” indicator

may flash. While this indicator is flashing, only DTS

source can be played. If you want to play a normal

PCM source soon, set the input mode back to AUTO.

– The “t” indicator may flash when a search or

skip operation is performed while the DTS source is

playing back with the input mode set to AUTO. If

this status continues for longer than 30 seconds, this

unit will automatically switch from “DTS-decoding”

mode to PCM digital signal input mode. The “t”

indicator will turn off.

0105V1300_27-33_EN(U) 02.8.5, 5:40 PM29

1 ... 32 33 34 ... 88

Comments to this Manuals

No comments

Yamaha RX-V1300 Manual Page 33

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V1300