Yamaha RX-A710 Owner's Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
En 98
Removing the limitation on HDMI video output
(MON.CHK)
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in “Resolution” (p.89) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
“MON.CHK” is set to “SKIP”, reset the setting to “YES”.
Restoring the default settings (INIT)
Restores the default settings for the selected item.
Choices
Updating the firmware (UPDATE)
New firmware will be released irregularly for the purpose of additional features or
product improvements. It can be downloaded from our website. If this unit is connected
to the Internet, you can download the firmware via the network. For details, refer to the
information supplied with updates.
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start
firmware update.
Choices
If this unit detects a newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the firmware of this unit by following the
procedure in “Updating the firmware of this unit” (p.102).
Checking the firmware version (VERSION)
Check the version of firmware currently installed on this unit.
You can also check the firmware version in “System” (p.96) in the “Information” menu.
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for this unit.
CANCEL Does not perform an initialization.
MON.CHK-YES
INIT-CANCEL
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
VOL.
SW
C
LR
SL SR
MUTE
PR
PL
SBL SB SBR
UPDATE-USB
VOL.
SW
C
LR
SL SR
MUTE
PR
PL
SBL SB SBR
VERSION-x.xx
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 121 122

Comments to this Manuals

No comments