Yamaha RX-A710 Owner's Manual Page 90

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 89
En 90
HDMI
Configures the settings related to HDMI.
HDMI Control
Enables/disables HDMI Control (p.115).
Settings
To use HDMI control, you need to perform the HDMI Control link setup (p.115) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of this unit to be used for TV audio input when “HDMI
Control” is set to “On”.
The input source of this unit automatically switches to TV audio (input jack selected in
here) when the TV input is switched to its built-in tuner.
Settings
AV1~6, AUDIO1~2
Default
AV4
When using ARC to input TV audio to this unit, you cannot use the input jacks selected in here for
connecting an external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.21) when “HDMI Control” is set to “On”.
Settings
You do not need to change this setting normally. In case noises are produced from the speakers connected
to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set “ARC” to
“Off” and use the TV speaker.
Standby Sync
Select whether to set this unit to standby in conjunction with TV power-off when “HDMI
Control” is set to “On”.
Settings
Audio Output
Selects a device to output audio (input through HDMI jacks).
The “Audio Output” settings are available only when “HDMI Control” is set to “Off”.
Amp
Enables/disables the audio output from the speakers connected to this unit.
Settings
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Off (default) Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and
“Standby Sync”.
Off Disables ARC.
On (default) Enables ARC.
Off
Does not set this unit to standby mode in conjunction with TV
power-off.
On
Sets this unit to standby mode in conjunction with TV power-
off.
Auto (default)
Sets this unit to standby mode in conjunction with TV power-off
only when this unit is receiving TV audio or HDMI signals.
Off Disables the audio output from the speakers.
On (default) Enables the audio output from the speakers.
Off (default) Disables the audio output from the TV.
On Enables the audio output from the TV.
Page view 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 121 122

Comments to this Manuals

No comments