Yamaha RX-A710 Manual Page 96

  • Download
  • Add to my manuals
  • Print
  • Page
    / 121
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 95
En 96
ADVANCED SETUP menu items
Changing the speaker impedance setting (SP IMP.)
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
Selecting the remote control ID (REMOTE ID)
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1
Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
The registered remote control codes (p.98) are not cleared even if you change the remote control ID.
Switching the video signal type (TV FORMAT)
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL (default)
Item Function Page
SP IMP. Changes the speaker impedance setting. 96
REMOTE ID Selects the remote control ID of the main unit. 96
TV FORMAT Switches the video signal type. 96
MON.CHK Removes the limitation on HDMI video output. 97
INIT Restores the default settings. 97
UPDATE Updates the firmware. 97
VERSION
Checks the version of firmware currently installed on
this unit.
97
6 Ω MIN
Select this when you connect 6-ohm speakers to this unit. You can also
use 4-ohm speakers as the front speakers.
8 Ω MIN (default) Select this when you connect 8-ohm or higher speakers to this unit.
SPIMP.-8MIN
REMOTEID-ID1
TVFORMAT-PAL
Page view 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 120 121

Comments to this Manuals

No comments