Yamaha RX-A710 Manual download pdf (Page 119)

En 119

Audio Section

• Rated Output Power

(20 Hz to 20 kHz, 0.09% THD, 8Ω)

Front L/R .................................................................90 W+90 W

(1 kHz, 0.9% THD, 8Ω)

Front L/R .......................................... 125 W/ch (105 W+105 W)

Center...........................................................125 W/ch (105 W)

Surround L/R.................................... 125 W/ch (105 W+105 W)

Surround Back L/R .......................... 125 W/ch (105 W+105 W)

• Dynamic Power (IHF)

Front L/R (8/6/4/2 Ω) .................................. 130/170/200/240 W

• Damping Factor

Front L/R, 20 Hz to 20 kHz, 8 Ω ............................. 100 or more

• Input Sensitivity / Input Impedance

[U.S.A. and Canada models]

AV5 etc. (1 kHz, 100 W/8 Ω)...............................200 mV/47 kΩ

[Australia model]

PHONO (1 kHz, 100 W/8 Ω) ................................3.5 mV/47 kΩ

AV5 etc. (1 kHz, 100 W/8 Ω)...............................200 mV/47 kΩ

• Maximum Input Signal

[U.S.A. and Canada models]

AV5 etc. (1 kHz, 0.5% THD, Effect On) ............................ 2.3 V

[Australia model]

PHONO (1 kHz, 0.1% THD)............................................ 60 mV

AV5 etc. (1 kHz, 0.5% THD, Effect On) ............................ 2.3 V

• Output Level / Output Impedance

REC OUT ...........................................................200 mV/1.2 kΩ

SUBWOOFER (2ch Stereo, Front: Small) .................1 V/1.2 kΩ

ZONE2 OUT.......................................................200 mV/1.2 kΩ

• Headphone Jack Rated Output / Impedance

AV5 etc. (1 kHz, 50 mV, 8 Ω) ..............................100 mV/560 Ω

• Frequency Response

AV5 etc. to Front (10 kHz to 100 kHz) ........................ +0/-3 dB

• RIAA Equalization Deviation

[Australia model]

PHONO.......................................................................0±0.5 dB

• Total Harmonic Distortion

[U.S.A. and Canada models]

AV5 etc. to Front (Pure Direct)

(20 to 20 kHz, 50 W/8 Ω)..................................... 0.06% or less

[Australia model]

PHONO to REC OUT (20 to 20 kHz, 1 V) ............ 0.02% or less

AV5 etc. to Front (Pure Direct)

(20 to 20 kHz, 50 W/8 Ω)..................................... 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

[U.S.A. and Canada models]

AV5 etc.

(Pure Direct, Input Shorted 250 mV, SP OUT

) .....100 dB or more

[Australia model]

PHONO (Input Shorted 5 mV, REC OUT) ...........81 dB or more

AV5 etc.

(Pure Direct, Input Shorted 250 mV, SP OUT)

.....100 dB or more

• Residual Noise (IHF-A Network)

Front L/R (SP OUT)............................................. 150 µV or less

• Channel Separation

[U.S.A. and Canada models]

AV5 etc.

(Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more

[Australia model]

PHONO (Input Shorted, 1 kHz/10 kHz)... 60 dB/55 dB or more

AV5 etc.

(Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more

• Volume Control

Range............................................. MUTE, -80 dB to +16.5 dB

Step ................................................................................ 0.5 dB

• Tone Control Characteristics (Front L/R)

Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz

Bass Turnover ............................................................... 350 Hz

Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz

Treble Turnover..............................................................3.5 kHz

• Filter Characteristics

(fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround, Surround Back)...... 12 dB/oct.

L.P.F. (Subwoofer)..................................................... 24 dB/oct.

Video Section

• Video Signal Type

[U.S.A. and Canada models]...........................................NTSC

[Australia model].................................................................PAL

• Video Signal Type (Video Conversion)..................... NTSC/PAL

• Video Signal Level

Composite..............................................................1 Vp-p/75 Ω

Component

Y ..........................................................................1 Vp-p/75 Ω

• Video Maximum Input Level (Video Conversion Off)

....................................................................... 1.5 Vp-p or more

• Video Signal to Noise Ratio................................ 50 dB or more

• Monitor Out Frequency Response (Video Conversion Off)

Component ............................................5 Hz to 60 MHz, -3 dB

FM Section

• Tuning Range

[U.S.A. and Canada models].............. 87.5 MHz to 107.9 MHz

[Australia model]............................. 87.50 MHz to 108.00 MHz

• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)

Mono .................................................................3 µV (20.8 dBf)

• Signal to Noise Ratio (IHF)

Mono ................................................................................71 dB

Stereo...............................................................................69 dB

• Harmonic Distortion (IHF, 1 kHz)

Mono .................................................................................0.3%

Stereo................................................................................ 0.5%

• Antenna Input................................................ 75 Ω unbalanced

AM section

• Tuning Range

[U.S.A. and Canada models]...................530 kHz to 1710 kHz

[Australia model]......................................531 kHz to 1611 kHz

1 2 ... 114 115 116 117 118 119 120 121

Comments to this Manuals

No comments

Yamaha RX-A710 Manual Page 119

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-A710