Yamaha RX-A1060 Owner's Manual download pdf (Page 109)

En 109

Setup menu items

Menu Item Function Page

Speaker

Auto Setup Automatically optimizes the speaker settings (YPAO). 40

Manual Setup

Setting Pattern Registers two speaker setting patterns and switches between them. 112

Setting Data Copy Copies the “Setting Pattern” parameters in the specified direction. 112

Power Amp Assign Selects a speaker system. 112

Configuration

Front Selects the size of the front speakers. 113

Center Selects whether or not a center speaker is connected and its size. 113

Surround Selects whether or not surround speakers are connected and their size. 113

Surround Back Selects whether or not surround back speakers are connected and their size. 113

Front Presence Selects whether or not front presence speakers are connected and their size. 114

Subwoofer Selects whether or not a subwoofer is connected and its phase. 114

Layout Selects the layouts of the surround speakers and front presence speakers. 114

Distance Sets the distance between each speaker and listening position. 114

Level Adjusts the volume of each speaker. 115

Parametric EQ Adjusts the tone with an equalizer. 115

Test Tone Enables/disables the test tone output. 115

Sound

Lipsync

Delay Enable Enables/disables the Lipsync adjustment for each input source. 116

Auto/Manual Select Selects the method to adjust the delay between video and audio output. 116

Adjustment Adjusts the delay between video and audio output manually. 116

Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 116

Max Volume Sets the limit value of the volumes. 116

Initial Volume Sets the initial volume for when this receiver is turned on. 117

Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 117

Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 117

CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D. 117

Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 117

Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos contents. 117

Video Video Mode Enables/disables the video signal processing (resolution and aspect ratio). 118

HDMI

HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 119

Audio Output Selects a device to output audio. 119

Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 120

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 160 161

No comments

Yamaha RX-A1060 Owner's Manual Page 109