Yamaha HTR-5835 Owner's Manual Page 51
- Page / 81
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
RECORDING
47
BASIC
OPERATION
Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions for those components.
1 Turn on the power of this unit and all
connected components.
2 Select the source component you want to
record from.
3 Start playback (or select a broadcast station)
on the source component.
4 Start recording on the recording component.
y
Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, “SP LEVEL”
(page 55) and the sound field programs does not affect recorded
material.
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R) jacks for recording.
You can only record analog signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR IN is not
output on VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
■ Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.
RECORDING
VOLUME
AUTO/MAN'L MONO
VIDEO L AUDIO R
MAN'L/AUTO FMLEVELNEXTEDIT
EFFECT
MEMORY
FM/AMPRESET/TUNING
A/B/C/D/E
l PROGRAM h
BASS/TREBLE
l
PRESET/TUNING/CH
h
TUNING MODE
INPUT MODE
TONE CONTROL
STRAIGHT
SPEAKERSPHONES
SILENT CINEMA
STANDBY
/ON
BA
MULTI CH
INPUT
VIDEO AUX
INPUT
DISPLAYCATEGORYSEARCH MODE
XM
12
CODE SET
STANDBY
SYSTEM
POWER
CD
MD/CD-R
TUNER
V-AU XDV D
AMP
POWER POWER
REC
AUDIO
DISC SKIP
AVTV
VCR
DTV/CBL
MULTI CH IN
SLEEP
TV
1
2
(U.S.A. model)
INPUT
CODE SET
CD
MD/CD-R
TUNER
V-AUXDVD
REC
AUDIO
DISC SKIP
VCR
DTV/CBL
MULTI CH IN
SLEEP
or
Front panel Remote control
Notes
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
- HTR-5835 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- CONTENTS 5
- FEATURES 6
- GETTING STARTED 7
- CONTROLS AND FUNCTIONS 10
- Approximately 6 m (20 ft) 11
- Front panel display 12
- Rear panel 14
- 1.8 m (6 ft) 15
- Banana plug 16
- 10 mm (3/8") 16
- Red: positive (+) 16
- Black: negative (–) 16
- ■ FRONT terminals 17
- ■ CENTER terminals 17
- ■ SURROUND terminals 17
- ■ SUBWOOFER terminals 17
- ■ SUBWOOFER jack 17
- CONNECTIONS 18
- Connecting video components 19
- Multi-format player/ 20
- External decoder 20
- PREPARATION 21
- Connecting audio components 22
- Connecting the FM and AM 23
- (U.S.A. model) 24
- STANDBY/ON 24
- Front panel 24
- Remote control 24
- BASIC SETUP 25
- Choices Display Speakers 26
- Front L/R 26
- Front L/R, Center 26
- Front L/R, Surround L/R 26
- PLAYBACK 28
- TV Sports 30
- Sound field 31
- Program name 31
- DIRECT STEREO 33
- 2ch Stereo 33
- Effect.Lvl:MID 33
- Input modeInput source 34
- A-E/CAT. A-E/CAT 35
- PRESET/CH 35
- Lights up 36
- Disappears 37
- Preset group 38
- Preset number 39
- FM/AM TUNING 41
- XM SATELLITE RADIO TUNING 42
- XM RADIO 43
- [040] Deep Tra 45
- <CAT>Rock 45
- Coldplay / Clo 45
- ALL CH SEARCH 45
- ENTERTAIN 48
- ■ Status and error messages 50
- Front panel Remote control 51
- For movie/video sources 52
- For music sources 54
- SLEEP indicator 55
- 1 Press AMP 56
- SET MENU 57
- Using SET MENU 58
- 1 SOUND MENU 59
- ■ Dynamic range F)D.RANGE 60
- 2 INPUT MENU 61
- 3 OPTION MENU 62
- ■ Zone set D)MULTI ZONE 63
- REMOTE CONTROL FEATURES 64
- to select the 65
- Controlling other components 66
- 3 Press u / d to select 67
- 4 Press j / i to change 67
- ■ DSP LEVEL (DSP level) 69
- ■ INIT. DLY (Initial delay) 69
- to 99 msec 69
- For 2ch Stereo: 69
- ■ DIRECT (Direct) 69
- TROUBLESHOOTING 71
- ADDITIONAL 73
- INFORMATION 73
- ■ Remote control 74
- STRAIGHT (EFFECT) 75
- While holding 75
- GLOSSARY 76
- Video signal information 78
- SPECIFICATIONS 79
- LIST OF REMOTE CONTROL CODES 80
Related products and manuals for AV receivers Yamaha HTR-5835
AV receivers Yamaha HTR-5960 Owner's Manual
(128 pages)
(128 pages)
AV receivers Yamaha RX-V730 Owner's Manual
(71 pages)
(71 pages)
AV receivers Yamaha RX-V359 Owner's Manual
(74 pages)
(74 pages)
AV receivers Yamaha RX-V596 Owner's Manual
(67 pages)
(67 pages)
AV receivers Yamaha DVX-S200 Owner's Manual
(115 pages)
(115 pages)
AV receivers Yamaha RX-V561 Service Manual
(87 pages)
AV receivers Yamaha RX-550 Owner's Manual
(79 pages)
(79 pages)
AV receivers Yamaha AVX-S80 Service Manual
(86 pages)
(86 pages)
AV receivers Yamaha DSP-A1092 Owner's Manual
(71 pages)
(71 pages)
AV receivers Yamaha TX-480 User Manual
(140 pages)
(140 pages)
AV receivers Yamaha HTR-5830 Service Manual
(70 pages)
(70 pages)
© 2020, manymanuals.com. All rights reserved. | 0.130 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals