Yamaha MC2403 User Manual download pdf (Page 8)

6 3

1/2/3

6 3

¥U

CUE/MK

VU meters and METER SELECT switches

(AUX 1/AUX 2/AUX 3/CUE/MIX)

The MC-series mixing console features four VU meters

with built-in LED peak indicators for monitoring signal

levels. The peak LED light at +14dB. The center meter

pair (L STEREO R) continuously monitors signals on the

main stereo program buss. The AUX 1/2/3 meter can be

switched to monitor signals on the AUX 1, AUX 2 or AUX

3 busses by pressing the corresponding METER assign

switch. The right meter can be switched between moni

toring the CUE or MIX levels by pressing the CUE or MIX

METER SELECT switch.

REAR PANEL CONNECTORS AND CONTROLS

® POWER switch

Flip up to turn the power ON, and down to turn the

power OFF. The VU meter lamps will light when the

power is ON.

) PHANTOM MASTER switch

Turn this switch ON to apply +48V DC to the LO-Z

XLR-type input connectors when using phantom-pow

ered condenser microphones.

•NEVER turn the PHANTOM MASTER switch ON

when using line-level sources connected to the LO-Z

inputs.

) MIX OUT connectors

The MIX OUT connectors (balanced XLR-type and

unbalanced phone) carry the mono MIX outputs sig

nals. Signal levels are the same as for the stereo OUT

connectors.

)AUX SEND(1,2&3) jacks

These jacks deliver the AUX 1, AUX 2 and AUX 3

mixes, respectively, to feed an external effect device or

power amplifier. Nominal output level /impedance is

+4dB/10ka

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 60 61

No comments

Yamaha MC2403 User Manual Page 8