Yamaha R-N303 Owner's Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 65
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
41 En
Configuring various functions (SETUP menu)
English
ADVANCED
OPERATION
Standby (Network Standby)
Selects whether the unit can be turned on from other
network devices (network standby).
Network Name
Edits the network name (the unit’s name on the network)
displayed on other network devices.
1 Select “Network Name”.
For information on selecting a menu option, refer to
the steps described on page 39.
2 Press ENTER to enter the name edit display.
3 Use the cursor keys ( / ) to select a
character and ( / ) to move the edit
position.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
4 To confirm the new name, press ENTER.
5 To exit from the menu, press SETUP.
Update (Network Update)
Updates the firmware via the network.
Bluetooth
Configures the Bluetooth settings.
On/Off
Enables/disables the Bluetooth function (p. 30).
Standby (Bluetooth Standby)
Selects whether to enable/disable the function that turns
on the unit from Bluetooth devices (Bluetooth standby). If
this function is set to “On”, the unit automatically turns on
when a connect operation is performed on the Bluetooth
device.
Note
This setting is not available when “Standby (Network Standby)”
(p. 41) is set to “Off”.
Balance
Adjusting the sound output balance of the left and right
speakers to compensate for sound imbalance caused by
speaker locations or listening room condition.
Setting range
L+10 to R+10
Default
Center
Max Volume
Sets the maximum volume to prevent excessive loudness.
Setting range
1 to 99 (1step increments), Max
Default
Max
Off Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off”
is selected.)
Auto
(default)
Enables the network standby function. The unit
enters power-saving mode eight hours after it is
disconnected from the network.
With an advanced energy saving design, this product achieves
a low power consumption of not more than two watts when in
Network Standby mode.
Perform
Update
Starts the process to update the unit’s firmware.
For details, see “Updating the unit’s firmware”
(p. 45).
Version
Displays the version of the firmware installed on
the unit.
ID Displays the system ID number.
SP A
R-N303 XXXXXX
NET NAME
R-N303 (example)
SP A
R-N303 XXXXXX›
NET NAME
R-N303 (example)
Off Disables the Bluetooth function.
On (default)
Enables the Bluetooth function. Immediately
after selecting the “On”, output of the network
source is paused.
Off Disables the Bluetooth standby function.
On (default)
Enables the Bluetooth standby function. (The
unit consumes more power than when “Off” is
selected.)
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 64 65

Comments to this Manuals

No comments