Yamaha MG166C-USB User Manual download pdf (Page 29)

Reference

Specifications

MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual

101

■ Electrical Speciﬁcations

■ General Speciﬁcations

All faders are nominal if not speciﬁed.

Output impedance of signal generator: 150 ohms

* MG166CX-USB: AUX1, 2, EFFECT

MG166C-USB: AUX1, 2, 3

MG166CX-USB/MG166C-USB

MIN TYP MAX UNIT

Frequency Response STEREO OUT GAIN: min (CHs 1–11/12)

20 Hz–20 kHz

Nominal output level @1 kHz

Input: CHs 1 to 15/16, RETURN, 2TR IN

-3.0 0.0 1.0 dB

GROUP OUT

EFFECT/AUX* SEND

MONITOR OUT, REC OUT

Total Harmonic Distor-

tion (THD + N)

STEREO OUT +14 dBu @ 20 Hz–20 kHz, Input GAIN Control at minimum

0.1 %

Hum & Noise

Hum & Noise are mea-

sured with a 6

dB/octave ﬁlter @ 12.7

kHz; equivalent to a 20

kHz ﬁlter with inﬁnite

dB/octave attenuation.

CH INPUT 1–8 MIC EIN (Equivalent Input Noise): Rs = 150 Ω, GAIN: maximum -128

dBu

STEREO OUT STEREO OUT, GROUP 1-2 fader and GROUP 3-4 fader at

nominal level and all channels’ ST and 1-2, 3-4 switches off.

-88

GROUP OUT

EFFECT/AUX* SEND Master EFFECT/AUX* control at nominal level and all CH

EFFECT/AUX* controls at minimum.

-81

STEREO OUT STEREO OUT, GROUP 1-2, GROUP 3-4 faders and one CH

fader at nominal level.

-64

GROUP OUT

STEREO OUT Residual Output Noise -98

Crosstalk (1 kHz) Adjacent Input CHs 1–8 -70

Input to Output STEREO L/R, CHs 1–8, PAN: panned hard left or right -70

Maximum voltage gain

(1 kHz)

All faders and controls

are maximum when

measured.

PAN/BAL: panned

hard left or hard right

Rs = 150 Ω

INPUT GAIN: maximum

MIC to CH INSERT OUT 60

MIC to STEREO OUT

MIC to GROUP OUT

MIC to GROUP to ST 94

MIC to REC OUT 62.2

MIC to MONITOR OUT, ST TO MONITOR 94

MIC to PHONES OUT 83

MIC to AUX SEND PRE 76

MIC to AUX SEND POST, EFFECT* SEND 86

CH 9/10, 11/12 LINE to STEREO OUT

CH 9/10, 11/12 LINE to GROUP OUT

CH 9/10, 11/12 LINE to AUX SEND PRE 47

CH 9/10, 11/12 LINE to AUX SEND POST, EFFECT* SEND 57

CH 13/14, 15/16 to STEREO OUT

CH 13/14, 15/16 to GROUP OUT

Rs = 150 Ω RETURN to STEREO OUT 16

RETURN to EFFECT/AUX* SEND 9

Rs = 600 Ω 2TR IN to STEREO OUT 27.8

Phantom Voltage MIC no load 48 V

USB Audio Input/Output: 44.1/48 kHz

Input HPF CHs 1–11/12 80 Hz, 12 dB/oct

Input equalization

±15 dB maximum

Tu rn over/roll-off frequency of

shelving: 3 dB blow maximum

variable level.

CHs 1–8 HIGH: 10 kHz (shelving)

MID: 250 Hz–5 kHz (peaking)

LOW: 100 Hz (shelving)

CH 9/10–15/16 HIGH: 10 kHz (shelving)

MID: 2.5 kHz (peaking)

LOW: 100 Hz (shelving)

PEAK Indicator Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for

CHs 9/10–15/16) reaches -3 dB below clipping (+17 dBu).

Internal Digital Effect

(Only MG166CX-USB)

16 PROGRAM, PARAMETER control

Foot Switch (Digital Effect On/Off)

LED Level Meter Pre MONITOR Level

STEREO/GROUP/PFL bus

2x12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB)

PEAK lights if the signal level reaches 3 dB below the clipping level.

Power Supply Adaptor PA-30 AC 35 VCT, 1.4 A, Cable Length = 3.6 m

Power Consumption 35 W (MG166CX-USB), 30 W (MG166C-USB)

Dimensions (W x H x D) 478 mm x 102 mm x 496 mm

Net Weight 5.5 kg (MG166CX-USB), 5.3 kg (MG166C-USB)

1 ... 28 29 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments

Yamaha MG166C-USB User Manual Page 29

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha MG166C-USB