Yamaha MG12XUK Owner's Manual download pdf (Page 11)

MG12XUK Owner’s Manual

Quick Start Guide

8. Turn on the power to the connected devices in the

following order: (microphone), (instru-

ment), (audio device)  [ / ] (this unit) 

(speakers).

NOTICE

Follow this order to prevent any loud, unexpected

noise from the speakers. Reverse the order when

turning the power off.

9. Set the [STEREO LEVEL] knob to the “” position.

10. For channels to which a microphone is connected,

set the [GAIN] knob to roughly the 12 o’clock posi-

tion.

11. Set the [LEVEL] knob of each channel in use to the

“” position.

12.While playing your instrument or speaking into the

microphone, raise the volume of the powered

speaker or amplifier until the desired volume is

reached.

NOTE

If the sound is not heard or the sound is distorted, follow the

instructions on page 18.

13.Set the [LEVEL] knobs as necessary to adjust the

volume balance between the corresponding chan-

nels.

This completes the STEP 2 instructions.

NOTE

The volume can be adjusted by using three functions; [PAD],

[GAIN], and [LEVEL]. Once you set the [PAD] switch and the

[GAIN] knob, avoid adjusting those controls as much as possible.

Instead normally use the [LEVEL] knob to adjust the volume. For

details about each function, see the “Controls and Functions” sec-

tion.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

Yamaha MG12XUK Owner's Manual Page 11