Yamaha MT100 User Manual download pdf (Page 15)

OVERDUBBING

Overdubbing is the process of recording a new track (or new tracks) whiie monitoring previousiy recorded tracks, if you’re oniy

pianning to record a maximum of four tracks, you can go ahead and overdub the second, third and fourth tracks. If you’re planning

to use the "ping-pong” recording technique to record more than four parts, however, record only up to the third track and then move

on to the ping-pong step (see "PING-PONG RECORDING” on page 14).

1. Plug the instrument or other source to be recorded into an

available channel input.

2. Make sure that the REC SELECTOR switches of previ

ously-recorded tracks are set to OFF so that they aren’t

erased when the new track is recorded.

3. Set up the channel-to-track assignment for the new track.

4. Check your monitor settings to ensure that you can monitor

the previously recorded track(s) as well as the new track to

be recorded (the PHONES SELECT switch should nor-

maiiy be set to MONITOR if you are monitoring via head

phones).

5. Set the recording level for the new track.

6. You can now “rehearse” the overdub without actually re

cording by simply playing back the already-recorded

track(s) and playing the new part.

7. Make sure the tape is rewound to the beginning of the

piece and start recording.

These steps are simply repeated to overdub tracks 3 and 4.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

No comments

Yamaha MT100 User Manual Page 15