Yamaha MT100 User Manual download pdf (Page 11)

THE RECORDING PROCESS

Recording with the MT100 is a very simple process. All you need is the MT100, a pair of monitor headphones, and an instrument,

microphone, or other signal source.

The multitrack recording process can be basically broken down into the following steps:

1. Record the First Track.

a) Channel-to-track Assignment.

b) Set Record Level.

c) Record.

2. Overdub the Remaining Tracks.

a) Channel-to-track assignment for each overdub.

b) Set record level for each overdub.

c) Record the overdub.

3. Ping-pong and Overdub More Tracks (if necessary).

4. Mixdown.

a) Set up for monitoring the mix.

b) Set up a rough mix and add effects.

c) Finalize and rehearse the mix.

d) Connect the MT100 ST OUT jacks to a stereo casette recorder.

e) Record (from the MT100 to the stereo cassette recorder).

These steps (and what the recording terms mean) will be described in detail below, so its a good idea to read through the foiiowing

sections in sequence in order to get a clear picture of the overall recording process.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

No comments

Yamaha MT100 User Manual Page 11