Yamaha O061 Manual download pdf

Firmware Update Procedure for RX-V3800

Page.1 of 4

March, 2009

Subject: RX-V3800 Firmware Update V:O061

Yamaha is pleased to offer the following firmware to ensure the best possible

performance for your Yamaha RX-V3800 AV Receiver. This firmware

improves the video section to ensure RGB full range repeat through HDMI

connection.

Requirements:

¾ A personal computer

¾ USB flash drive (Supporting Mass Storage Class)

The following pages contain the firmware update instructions for the RX-V3800.

The outline of the update procedure is as follows:

1. Copy the firmware file to the USB flash drive

2. Enter USB firmware update mode in the advanced setup

3. Insert USB flash drive to AV receiver

4. Confirm updated firmware version

Note: Executing this update will RESET the receiver’s setting to factory default.

< IMPORTANT NOTICE >

Do not attempt to update your Yamaha receiver using any other data file except those provided

directly from the Yamaha website.

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required

to restore proper operation will not be covered under the Yamaha Limited Warranty.

1 2 3 4

Firmware Update Procedure for RX-V3800 Page.1 of 4 March, 2009 Subject: RX-V3800 Firmware Update V:O061 Yamaha is pleased to offer the following

Page 2

Firmware Update Procedure for RX-V3800 Page.2 of 4 Instructions for Firmware Update: Step 1. Unzip the downloaded content and copy the firmware “R

Firmware Update Procedure for RX-V3800 Page.3 of 4 Step 7. After “Firmware Update is complete” is displayed for few seconds, the receiver will powe

Firmware Update Procedure for RX-V3800 Page.4 of 4 IN CASE OF ERROR If “Firmware Update is complete” is NOT displayed or an error message is shown

No comments

Yamaha O061 Manual