Yamaha DSP-Z7 Manual download pdf (Page 2)

Firmware Update Procedure for DSP-Z7

Page.2 of

Firmware Update by USB

Step1:

Delete any existing files in the USB flash drive.

Step2:

Download and copy the firmware “RXZ7-xxxx.bin” into the root directory of

the USB flash drive.

Step3:

Set the MASTER ON/OFF button on the front panel to OFF, and confirm that

the AC power cable is properly connected to an outlet.

Step4:

Insert the USB flash drive in the USB terminal located on the front panel.

While pressing the STRAIGHT button, press (and release) the MASTER

ON/OFF button and then keep depressing the STRAIGHT button until

“ADVANCED SETUP” appears on the front panel display.

(Note: “ADVANCED SETUP” is only displayed for a few seconds.)

Requirement: (Formatting by FAT system is required in advance).

- USB flash drive, with enough free space to hold over 16 MB.

- Firmware file provided by YAMAHA,”RXZ7-xxxx.bin”.

Drag & Drop the file into

USB drive.

MASTER

STRAIGHT

USB Port

1 2 3 4 5

No comments

Yamaha DSP-Z7 Manual Page 2