Yamaha A-U671 Owner's Manual download pdf (Page 12)

CONNECTIONS

9 En

English

n Connecting speaker cables

1 Remove approximately 10 mm (3/8”) of insulation from the end of each speaker cable.

2 Twist the bare wires of the cable firmly together.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side of each terminal.

5 Tighten the knob to secure the wire.

• Use speakers with the impedance of 6 Ω or higher.

• Do not let bare speaker wires touch each other or any metal part of this unit. This could

damage this unit and/or the speakers.

n Using a banana plug (North America, China and Australia

models only)

1 Tighten the knob.

2 Insert the banana plug into the end of the corresponding terminal.

To use a subwoofer, connect the jack of the subwoofer to the SUBWOOFER jack of the

unit as shown in the figure.

After all the connections are complete, plug in the power cable to the AC outlet.

CAUTION

10 mm

(3/8”)

Red: positive (+)

Black: negative (–)

Banana plug

Connecting a subwoofer

Connecting to power source

Subwoofer

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 58 59

No comments

Yamaha A-U671 Owner's Manual Page 12