Yamaha VP1 Owner's Manual download pdf (Page 109)

REFERENCE

Chapter 1 PLAY Mode

1 - 40

Procedure

1. Check that the Element Switch for the destination element is “on”.

If the setting is “off”, change it.

2. If the source voice is in a different bank, press the appropriate bank

button (

3. Move the cursor to the element that you want to copy. You can move the

cursor using the dial, the cursor buttons ( ), the program buttons

(

), or the

INC/YES

and

DEC/NO

buttons.

You can use the

:ABC and

:123 functions to switch the order of

the listing (alphabetic ↔ numerical). If you want to audition the sound that the

copy operation will produce, proceed to Step 4 below. If you want to skip the

audition stage, jump to Step 5.

4. Press

:Audi.

If the source and destination voices have different initial scenes and the

SYSTEM mode’s “Scene Copy Mode” is set to “confirm”, the LCD displays a

message asking whether you want to swap the element’s scene data. If you see

this message, press

INC/YES

to swap data, or

DEC/NO

to leave scene data

unchanged.

The LCD displays the “Now executing!” message while the VP1 sets up for the

audition. When setup is completed, the word “Audi” begins flashing. You can

now play on the keyboard to “audition” the sound that the destination voice

will have after the copy is complete.

While “Audi” is flashing, you can press

:Org to change back and forth

between the new sound and the destination voice’s original sound. (The word

“Org” on the display flashes to indicate that you are hearing the original

sound.) This allows you to compare the sound of the original voice with the

sound that the voice will have after you complete the copy.

5. Press

ENTER

to proceed.

If you prefer to cancel the operation, press

EXIT

to return to the original

ELEMENT AUDITION screen.

▼ When you press

ENTER

, the screen displays the “Are you sure?” query.

6. Press

INC/YES

to execute the copy.

▼ (If you do not want to proceed, press

DEC/NO

EXIT

to return to Step 4

above.)

FYI

• You can skip the audition step (Step 4) and press

ENTER

immediately after selecting the

source element. If you do so, the LCD will first display the “Are you sure?” query. If the

source and destination voices have different initial scenes and the SYSTEM mode’s “Scene

Copy Mode” is set to “confirm”, the LCD will then display a message asking whether you

want to swap the element’s scene data.

• When the VP1 copies the element, it also copies the values of all the parameters listed

beneath the dotted line in the VOICE SETUP display (all parameters from PortaMode

down). If MaxNotes is set to 1, then this setting is also copied.

• You can use the

buttons to toggle elements on and off during editing.

Editing Functions

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 173 174

Comments to this Manuals

No comments

Yamaha VP1 Owner's Manual Page 109

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha VP1