Yamaha VP1 Owner's Manual download pdf (Page 35)

2 - 6

BASICS

Chapter 2 Trying It Out

Using Quick Edit

The VP1’s Quick Edit capability allows you to perform simple voice editing during

performance. The procedure below introduces you to Quick Edit operation. Refer to

the next chapter for a detailed explanation about quick editing. (➝ BASICS: 3-16)

Procedure

1. Press bank button

▼The LED above the button begins flashing.

2. Press program button

▼The LCD changes to the display illustrated below, indicating that the

selected voice is A02, “WaterBell”.

3. Check that the top line of the Quick Edit panel (EQ LOW, EQ LO-MID,

EQ HI-MID, and EQ HIGH) is highlighted.

If a different line is highlighted, press the Quick Edit panel’s button to

move the highlight to the top.

4. Play on the keyboard with your right hand while moving the second quick-

edit slider (QS2) up and down.

The slider does not become effective until it moves past the midpoint on the

scale. For details about how a controller becomes effective, refer to the

discussion of the Controller Hook function in the next chapter. (➝ BASICS: 3-

14)

The highlighted EQ LO-MID above the slider tells you that the current function

of the slider is to control the gain for the low-middle range.

5. Press the button on the Quick Edit panel.

▼The highlight moves to the second line of the Quick Edit panel (AT

FOLLOW, VEL SENS, POR TIME, and EF DEPTH).

6. Play on the keyboard with your right hand while moving QS4 up and

down.

Once again, the slider does not become effective until it moves past the

midpoint on the scale. Because EF DEPTH is highlighted, you know that the

slider’s current function is to control the effect depth.

First Try

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 173 174

No comments

Yamaha VP1 Owner's Manual Page 35