Yamaha VP1 Owner's Manual download pdf (Page 31)

2 - 2

BASICS

Chapter 2 Trying It Out

First Try

Now that you have connected up the VP1 as described in Chapter 1, you are ready to try it out.

Checking the Sound Output

First, let’s check that the VP1 correctly generates sound.

Procedure

1. Press the POWER switch on the rear panel.

▼The power comes on. The LCD briefly displays a greeting, then switches to

the screen illustrated below.

2. Switch on the power to the amplifiers.

▼The power-indicator LEDs on the amplifiers come on.

3. Adjust the amplifier volume.

4. Raise the VOLUME slider on the VP1.

5. Check that the LED above the

PLAY

button is on.

If the LED is off, press the

PLAY

button once: the LED should come on.

6. Play some notes on the keyboard.

▼You should hear the sound of the notes.

If you do not hear anything, refer back to Chapter 1 and recheck the

connections. If the connections appear to be correct, refer to the

Troubleshooting section. (➝ REFERENCE: App-5)

FYI

• For some voices, the initial display includes a “Notes” window containing a comment about

the voice. You can close the window by pressing the

EXIT

button.

First Try

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 173 174

No comments

Yamaha VP1 Owner's Manual Page 31