Yamaha MU90R User Manual Page 145

  • Download
  • Add to my manuals
  • Print
  • Page
    / 165
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 144
136
APPENDIX
4. Control Change
Status: BnH
If multipart parameter “Rcv CONTROL CHANGE” is OFF, the part will continue to accept
Channel Mode messages but will ignore all other Control Change messages.
Bank Select MSB/LSB: 00H/20H
Cntrl# Parameter Data Range
0 Bank Select MSB 0:Normal 64:SFX voice 126:SFX kit 127:Drum
32 Bank Select LSB 0 to 127
Default: 00 00H
If multipart parameter “Rcv BANK SELECT” is OFF, the part ignores this message.
The new bank selection does not become effective until receipt of the next Program Change
message.
The Bank Select MSB selects melody voice, SFX voice, or rhythm kit. The MSB allows any
channel to be designated for rhythm play.
Bank Select MSB values are as follows.
00H: Melody voice
01H to 3FH: not used
40H: SFX voice
41H to 7DH: not used
7EH: SFX kit (SFX voices arranged over keyboard)
7FH: Rhythm kit (Rhythm voices arranged over keyboard)
The Bank Select LSB selects from the extended melody voice set. (SFX kit and rhythm kit
voices do not currently support Bank Select LSB extension sets.) Each bank is set for a spe-
cific type of variation, simplifying retrieval of the desired voice. Names of extensional voices,
like basic voices, are defined (see Table 1). Other banks and voices may be added in the fu-
ture.
Some models do not support all of the LSB-selectable extensional voices listed in Table 1. If
support is included for one or more voices in an extensional bank, however, all the other pro-
gram change numbers in that bank are filled with the corresponding voices of the Bank #0
(basic voices).
Note 1: Under default selection, Channel 10 plays rhythm voices, while other channels take Bank #0 melody voices.
(Same as GM system - Level 1)
Note 2: Receipt of Bank Select MSB/LSB does not immediately change the voice. The channel stores the received
Bank-Select MSB/LSB setting, but does not apply it until receipt of the next Program Change message.
Note 3: If the new Bank Select MSB is 00H (melody voice) but the tone generator does not support the melody
voice corresponding to the last received Bank Select LSB, the channel reverts to the Bank Select LSB cor-
responding to its most recently played melody voice.
Note 4: If the new Bank Select MSB is 7FH (rhythm voice), the tone generator unconditionally uses LSB 00H. If
the tone generator does not support a drum kit corresponding to the channel’s most recently received Pro-
gram Change, the channel will revert to the Program Change corresponding to its most recently played
rhythm kit.
Page view 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 164 165

Comments to this Manuals

No comments