Yamaha MP-1 Owner's Manual download pdf (Page 26)

MIDI Functions

NP-30/YNP-25 Owner’s Manual

Program Change ON/OFF

Normally the NP-30/YNP-25 will respond to MIDI program change numbers received from an

external keyboard or other MIDI device, causing the same numbered voice to be selected on the

corresponding channel (the keyboard voice does not change). The NP-30/YNP-25 will normally

also send a MIDI program change number whenever one of its voices is selected, causing the same

numbered voice or program to be selected on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers. This function makes it possible to cancel

program change number reception and transmission so that voices can be selected on the NP-30/

YNP-25 without affecting the external MIDI device.

While holding down the [SONG

] and [GRAND PIANO] buttons, press the

C#6 key. Pressing the C#6 key repeatedly toggles between Program Change On

and Off.

Control Change ON/OFF

Normally the NP-30/YNP-25 will respond to MIDI control change data received from an external

MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal

and other “control” settings received from the controlling device (the keyboard voice is not

affected). The NP-30/YNP-25 also transmits MIDI control change information when the pedal or

other appropriate controls are operated.

This function makes it possible to cancel control change data reception and transmission so that,

for example, the NP-30’s/YNP-25’s pedal and other controls can be operated without affecting an

external MIDI device.

While holding down the [SONG

] and [GRAND PIANO] buttons, press the

D6 key. Pressing the D6 key repeatedly toggles between Control Change On and

Off.

For information on program

change numbers for each of the

NP-30’s/YNP-25’s voices, refer to

MIDI Data Format on page 28.

Default setting: ON

NOTE

C#6

For information on control

changes that can be used with

the NP-30/YNP-25, refer to MIDI

Data Format on page 28.

Default setting: ON

NOTE

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 36 37

No comments

Yamaha MP-1 Owner's Manual Page 26