Yamaha MOXF6 Owner's Manual Page 67

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 66
MOXF6/MOXF8 Owner’s Manual
Appendix
67
Are the filter settings appropriate?
Excessively high filter resonance settings can cause distortion.
Are any of the following volume parameters set so high that clipping is occurring?
Sound is cut off.
Is the entire amount of notes played (via your keyboard playback and Song/Pattern/Arpeggio playback) exceeding the maximum
polyphony of this instrument?
Only one note sounds at a time.
When this situation occurs, the Mono/Poly parameter in the current mode is set to “mono.” If you wish to play chords, set this parameter
to “poly.
Pitch is wrong.
Is the Master Tune parameter in the Utility mode set to a value other than “0”?
Is the Note Shift parameter in the Utility mode set to a value other than “0”?
When the Voice produces a wrong pitch, is the appropriate tuning system selected from Micro Tuning parameter in the Voice Edit
mode?
When the Voice produces a wrong pitch, is the LFO Pitch Modulation Depth in the Voice Edit mode set too high?
When the Voice produces a wrong pitch, is the Coarse Tune or the Fine Tune in the Voice Edit mode set properly?
When the Performance/Song/Pattern produces a wrong pitch, are the Note Shift and Detune parameters of each Part set to a value other
than “0”?
When the Song/Pattern playback produces a wrong pitch, is the Note Offset parameter in the Groove display set to a value other than “0”?
No effect is applied.
Check the on/off status of the EFFECT [INSERTION]/[SYSTEM]/[MASTER] button.
Is the Reverb Send or Chorus Send set to a value other than “0”?
[VOICE] [EDIT] Element/Key selection [F3] FILTER
[PERFORM] [EDIT] Part selection [F4] TONE [SF1] FILTER
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F4] TONE [SF1] FILTER
[UTILITY] [F1] GENERAL [SF1] TG “Volume
[VOICE] [EDIT] [COMMON] [F2] OUTPUT Volume
[VOICE] [EDIT] Element/Key selection [F4] AMP [SF1] LVL/PAN “Level”
[PERFORM] [EDIT] [COMMON] [F2] OUT/MFX [SF1] OUT “Volume”
[PERFORM] [EDIT] Part selection [F2] OUTPUT [SF1] VOL/PAN “Volume”
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F2] OUTPUT [SF1] VOL/PAN “Volume
[VOICE] [F4] PORTA “Mono/Poly”
[PERFORM] [EDIT] Part selection [F1] VOICE [SF2] MODE “Mono/Poly”
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F1] VOICE [SF2] MODE “Mono/Poly”
[UTILITY] [F1] GENERAL [SF1] TG “Tune
[UTILITY] [F1] GENERAL [SF1] TG “NoteShift”
[VOICE] [EDIT] [COMMON] [F1] GENERAL [SF2] PLY MODE “M. Tuning No.
[VOICE] [EDIT] Element/Key selection [F5] LFO “PMod”
[VOICE] [EDIT] Element/Key selection [F2] PITCH “Coarse” / “Fine
[PERFORM] [EDIT] Part selection [F4] TONE [SF1] TUNE
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F4] TONE [SF1] TUNE
[SONG]/[PATTERN] [F2] GROOVE “NOTE OFST”
[VOICE] [EDIT] [COMMON] [F2] OUTPUT “ChoSend” / “RevSend”
[PERFORM] [EDIT] [COMMON] [F2] OUT/MFX [SF1] OUT “ChoSend” / “RevSend”
[SONG]/[PATTERN] [MIXING] [EDIT] Part selection [F2] OUTPUT [SF1] VOL/PAN “ChoSend” / “RevSend”
Page view 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 79 80

Comments to this Manuals

No comments