Yamaha MOXF6 Owner's Manual download pdf (Page 44)

MOXF6/MOXF8 Owner’s Manual

Quick Guide

Creating a synthesizer part by

using Arpeggio

Next, record Arpeggio playback via Realtime Recording to

Trac k 3.

1 In the Song Play mode, select the same Song to

which the Drum and Bass parts have already been

recorded.

2 Press the ARP [ON/OFF] button so that its lamp

lights.

3 Press the [REC] button, followed by the [F1]

SETUP button, then set the parameters as below.

• “Type” = “replace”

• “Quantize” = “off”

• “RecTr” = “3”

4 Press the [F2] VOICE button, followed by the

[CATEGORY SEARCH] button then select the

Synthesizer Voice.

Set the Main Category to “Synth Pad / Choir” then set the

Sub Category to “Analog.” Move the Cursor [>] button to call

up the Voice List. From this list, select “PRE5 H04 Saw Pad”

then press the [ENTER] button.

5 Press ARP [EDIT] or [F3] ARP ED  [F3] MAIN,

then set the Switch parameter to “on” and set the

“VoiceWithARP” parameter to “off.”

With the “Switch” parameter “on,” the Arpeggio of Track 3

can be played back.

If the “VoiceWithARP” parameter is set to “on,” selecting the

Arpeggio Type will change the Voice from the one selected

in step 4. This is why you should set the “VoiceWithARP”

parameter to “off” here.

6 Press [F2] TYPE  [SF1] ARP1, then assign the

Arpeggio Type to the [SF1] ARP1 button.

On this display, set the parameters as below:

• “Bank” = “Pre”

• “Category” = “Seq”

• “SubCategory” = “Genrl”

• “Type” = “7483”

If desired, assign different Arpeggio Types to the [SF2] –

[SF6] buttons.

NOTE

For instructions on using the Location settings, see the

“Reference Manual” PDF document.

HINT

Rehearsing function while recording

During Realtime Recording in the Song/Pattern mode, pressing

the [REC] button will call up the “Rehearsal” mode. In this

mode, the [REC] indicator will flash and playback will continue

uninterrupted; however, no data will be recorded, letting you

practice a part or try out various ideas (while listening to the

other tracks) without actually recording. To return to the Record

mode, press the [REC] button again—the [REC] indicator will

light continuously.

Punch Out point

Recording ends at this point and normal

playback of the recording Track starts.

Punch In point

Playback of the recording Track is turned off from this point,

and your keyboard performance will be recorded to the Track.

[SF1] COPYLOC button

Press the [SF1] COPY LOC to assign the measure numbers

registered to the Locations (Loc1 and Loc2) to the Punch

In and Punch Out points.

Recording

Rehearsal mode

(playback continues)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

Comments to this Manuals

No comments

Yamaha MOXF6 Owner's Manual Page 44

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha MOXF6