Yamaha ELB-01 Owner's Manual download pdf (Page 50)

ELB-01 Owner’s Manual

Voice Controls and Effects

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

Rotary Speaker

Rotary Speaker recreates the rich, swirling sound of the popular rotating speaker effect.

The Rotary Speaker effect can be switched in real time as you play, with either the front

panel button or the Left Footswitch (when properly set for Footswitch operation).

Keep in mind that the Rotary Speaker effect CANNOT be turned on only by turning

on the [ROTARY SP SPEED] button. To use the Rotary Speaker effect, follow the

steps below.

Select the Rotary Speaker effect from the desired Voice.

When you want to set Rotary Speaker for one of the Voice sections, you can

select the effect category of Rotary Speaker in the Voice Condition display, Page

4. See page 45 for details.

Adjust the rotating speed and mode of the Rotary Speaker.

Press the [ROTARY SP SPEED] button to call up the Rotary Speaker display.

The settings in this display are common to all Voice sections.

1 Speed

Determines the speed of the speaker rotation.

Press the [C] button to make the “¿” indicator ﬂash, then use the DATA

CONTROL dial to change the setting.

Range: 2.69Hz – 39.7Hz

2 Mode

Determines the slow/stop mode when the [ROTARY SP SPEED] button is off.

If Slow is selected, a slow chorus effect is applied when you turn off the button

on the panel. If Stop is selected, the Rotary Speaker effect turns off (stops

completely) when you turn off the button on the panel.

Press the [D] button to make the “÷” indicator ﬂash, then use the DATA

CONTROL dial to change the setting.

Once the Rotary Speaker effect has been turned on and set, you can control the

effect in real time from the panel or from the Left Footswitch.

EFFECT¿ROTARY SP.¨1›

TYPE¿01:XG ROTARY SP

Select “Rotary Speaker” here

SPEED¿4.88 MODE÷SLOW

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 187 188

No comments

Yamaha ELB-01 Owner's Manual Page 50