Yamaha ELB-01 Owner's Manual download pdf (Page 164)

Appendix

ELB-01 Owner’s Manual

164

Mount the Sideboards onto the Pedalboard

unit.

Be sure not to confuse the Right and Left

Sideboards.

3-1 Raise the Pedalboard as shown in the illustration

below.

3-2 Position each screw hole on both the Pedalboard

and Sideboards as shown in the illustration and

mount the Sideboards onto the Pedalboard using

the 4 short screws (2 screws on each Sideboard).

3-3 Stand the Pedalboard after securing the screws.

Mount the Speaker Unit onto the Sideboards.

4-1 Remove the Grill Net from the Speaker Unit.

4-2 With the help of another person, hold the Speaker

unit horizontally, and slide it from the rear into

place along the brackets.

Take care not to drop the Speaker unit or to pinch your

ﬁnger(s) between the Speaker unit and Sideboard.

4-3 While holding the Sideboard(s) to the Speaker

unit, fasten the four short screws from the rear, to

secure the Speaker unit to the Sideboards. Cover

the four screw holes on the rear side with the

corresponding screw caps.

Mount the Main Unit.

5-1 As shown in the illustration, hold the Main unit

horizontally (with two people), and place it on the

front side of the Speaker unit so that the arm at the

bottom of the Main unit comes in front of the

Sideboards, then slide it to the rear side.

Take care not to drop the Main unit or to pinch your

ﬁnger(s) between the Speaker unit and Main unit.

Push the Sideboard

toward the Pedalboard

Short/black screws

Screw caps

Short screws

Push the Sideboard

toward the Speaker unit

Push the Sideboard

toward the Speaker unit

Short

screws

1. Place down so that

the arm comes in

front of the Sideboard

Arm

2. Slide to the rear side

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 187 188

Comments to this Manuals

No comments

Yamaha ELB-01 Owner's Manual Page 164

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha ELB-01