Yamaha DX200 Owner's Manual download pdf (Page 75)

Setup Menus

When the DX200 Editor is active and selected, the following functions appear in the

Setup menu:

• System Setup

• DX200 Editor Setup

• Transmit DX200 Bulk Dump Data

• Receive DX200 Bulk Dump Data

This opens the Properties dialog for setting the MIDI In/Out of the OMS driver.

• MIDI In

This box is for selecting the MIDI input device. The device corresponds to the DX200's

MIDI OUT is selected here.

• MIDI Out

This box is for selecting the MIDI output device. The parameters of the DX200 Editor are

transmitted to the device selected here. The device corresponds to the DX200's MIDI IN

is selected here.

• MIDI Thru

When this is checked, the MIDI signal received from the MIDI IN will pass through the

device selected with MIDI Out (see above) before being sent to tone generator.

• The names of devices vary with the setup ﬁles. Use the setup ﬁle appropriate to your system.

• You need the serial port MIDI interface for using the serial port, and the USB MIDI interface for

using the USB port.

•OK

Click this to apply the setting and exit from the System Setup dialog.

• Cancel

Click this to exit the System Setup dialog box without changing the setting.

System Setup

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82

No comments

Yamaha DX200 Owner's Manual Page 75