Yamaha CS-80 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
ARTURIA – CS-80V2 – USER’S MANUAL
21
The ADSR envelope controllers
4.4 O
VERVIEW OF THE
M
ULTI
M
ODE
The CS-80V2 allows the creation of 8 parallel voices and thus, in theory, 8 different sounds
played at the same time.
On the original CS-80, a note was controlled by a card that was filled with electronic circuits that represented the
complete synthesis architecture. It is for this reason that we could, for example, obtain notable differences in the
settings of a sound between the notes played and the tuning of the oscillator.
The CS-80V2 conserves this ideal: you can program eight different sounds (eight voices), which are assignable in a
multitude of applications.
With the Multi mode, it is possible for you to assign each of these 8 voices to 4 keyboard zones
and to 4 different MIDI channels. These 8 voices can also be superimposed across the entire
keyboard in order to create a composite sound that is very rich and expressive (Unison mode).
Let’s follow this example:
Choose the preset Tremolo in the Templates low frequency bank and Effects sub-bank. In
this example, the 8 voices all have the same settings.
First, open the Multi mode to access the parameters.
Now, set the different zones as follows:
o The first 4 voices will occupy zone1 (C1 to B3);
o The fifth voice will occupy zone2 (C4 to C5);
o The sixth voice will occupy zone 3 (C5 to C6)
o The seventh & eighth voices will occupy the zone 4 (C6 to C7).
o All these zones must be configured on all MIDI channels by selecting Omni, close to
the Keyboard range.
The voice modes allow you to play differently according the voice:
o Set the UniLast for each voice
o Deactivate the PORTA, R.MOD and FX buttons for each voice
o Set the FEET voice to 16”, this will create a bass for the low part of the keyboard.
Keyboard and MIDI configuration Feet configuration
In order to get a polyphonic voice you have to set number of polyphonic voices in the tool
bar, x3 is enough for our sound:
Set the polyphony
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Comments to this Manuals

No comments