Yamaha SRT-1000 Owner's Manual download pdf (Page 22)

Troubleshooting

Refer to the table below when the unit does not function properly. If the problem you are

experiencing is not listed below or if the instructions below do not help, turn off the unit,

disconnect the power cable, and contact the nearest authorized Yamaha dealer or

service center.

First, check the following:

A The power cables of the unit, TV and playback devices (such as BD players)

are connected to AC wall outlets securely.

B The unit, TV and playback devices (such as BD players) are turned on.

C The connectors of each cable are securely inserted in to jacks on each device.

Power and system

Audio

Problem Cause Remedy

The power turns

off suddenly.

The auto power standby function

worked.

When the auto power standby

function is enabled and one of the

following conditions is met, the

unit will automatically turn off.

- No operation for 8 hours

- No audio input and no

operations for 20 minutes when

BLUETOOTH is selected as the

input source.

Turn on the unit again. To stop the unit

from turning off automatically, disable

the auto power standby function

(p.17).

The internal microcomputer is

frozen, due to an external electric

shock (such as lightning or

excessive static electricity) or to a

drop in the power supply voltage.

Hold down (power) on the front

panel of the unit for more than 10

seconds to reboot it. (If the problem

persists, disconnect the power cable

from the AC wall outlet and plug it

again.)

The protection circuitry has been

activated. (The STATUS indicator

on the front panel of the unit

flashes.)

After confirming that all connections

are made properly, turn on the unit

again. If the power often suddenly

turns off, unplug the power cable from

the AC wall outlet and contact the

nearest authorized Yamaha dealer or

service center.

Bluetooth connection is

terminated on a Bluetooth device

when the Bluetooth standby mode

is enabled.

Disable the Bluetooth standby mode

(p.13).

The power

cannot be turned

on.

The protection circuitry has been

activated three times

consecutively. (If you try to turn on

the power in this condition, the

STATUS indicator flashes.)

To protect the product, the power

cannot be turned on. Unplug the

power cable from the AC wall outlet

and contact the nearest authorized

Yamaha dealer or service center.

The unit is not

responding

correctly.

The internal microcomputer is

frozen, due to an external electric

shock (such as lightning or

excessive static electricity) or to a

drop in the power supply voltage.

Hold down (power) on the front

panel of the unit for more than 10

seconds to reboot it. (If the problem

persists, disconnect the power cable

from the AC wall outlet and plug it

again.)

The unit

operates by

itself.

Another Bluetooth device is being

operated nearby.

Terminate Bluetooth connection of the

unit and connect the unit and device

again (p.13).

Problem Cause Remedy

No sound.

Another input source is selected. Select an appropriate input source

(p.8).

The mute function is activated. Cancel the mute function (p.8).

The volume is too low. Turn up the volume (p.8).

No sound is

coming from the

subwoofer.

The volume of the subwoofer is

too low.

Turn up the volume of the subwoofer

(p.8).

The playback source does not

contain low-frequency signals.

The volume

decreases when

the unit is turned

on.

The automatic volume adjustment

function worked. To prevent

excessive loudness, the unit

automatically controls its volume

within a certain level when the unit

is turned on.

If necessary, turn up the volume (p.8).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Comments to this Manuals

No comments

Yamaha SRT-1000 Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for Supplementary music equipment Yamaha SRT-1000