Yamaha SRT-1000 Owner's Manual download pdf (Page 20)

The unit has dual built-in subwoofers; however you can connect an external subwoofer

when you want to enhance low frequency sound. Connect a subwoofer to the

SUBWOOFER OUT jack of the unit.

NOTE

• Use an external subwoofer with built-in amplifier.

You can change the dynamic range to make sounds easy to hear at a low volume.

1 Turn off the unit.

2 Hold down the key for the desired mode for more than 5 seconds.

The unit turns on with the selected setting.

Three settings are available (see below).

You can confirm the setting status by the lights of the indicator, when the unit is turned

on.

NOTE

• Normal is set as default.

Using an external subwoofer

Mono input

Pin cable for subwoofer

(commercially available)

Unit (rear)

Overhead view

Making sound easy to listen at low volume

Setting Description Indicator

Normal Automatically adjusts the dynamic range

based on the volume level of the source.

Lights up in green

Standard Compresses the dynamic range to suit a

living room environment, etc.

Lights up in orange

Maximum Does not compress the dynamic range.

Lights up in red

Returns to Normal

Sets to Standard

Sets to Maximum

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 51 52

No comments

Yamaha SRT-1000 Owner's Manual Page 20