Yamaha DME Designer Owner's Manual download pdf (Page 14)

Advanced Setup

DME Setup Manual 14



DME Network Settings

Before making the DME network connections, set the device group and IP address for each DME unit from

DME Designer via a USB connection.

By default, all DME units are assigned the IP address 192.168.000.002.

Please ensure that the USB-MIDI driver has been installed before proceeding.

n T

he same driver can be used for multiple DME units of the same type (DME64N, DME24N, DME Satellite). A common USB driver

can be used for multiple DME Satellite units.

n If using a DME64N or DME24N, setting can be performed directly via the front display (page 21). ICP1 settings can be made via

the unit’s control panel. Refer to “ICP1 settings and operation” of the DME Designer V3.8 Owner’s Manual.

1 Connect the computer to the DME unit via a USB cable, then turn the DME unit power ON.

2 Click the [Communication Port] button from the Main Panel window to display the

“Communication Port” dialog box.

Select either “YAMAHA USB OUT 0-1” or “Yamaha DME NETWORK-1” for the [Tx] (transmit)

field, and “YAMAHA USB IN 0-1” or “Yamaha DME NETWORK-1” for the [Rx] (receive) field,

and click the [OK] button.

4 Click the [Network Setup] from the [Hardware] menu on the Main Panel window to display

the “Network Setup” dialog box.

USB cable

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

No comments

Yamaha DME Designer Owner's Manual Page 14