YRC Setting app Wireless Network Connection & Installation
To connect to the YZF-R1M wireless network, you’ll need the
serial number of the CCU module.
Turn main switch ON, go to Network, or Wi-Fi section in the Settings of your
device, you should see an entry titled YAMAHA MOTOR CCU DF0010*, tap and
enter serial number from CCU in the password field. Tap connect.
The message; Obtaining IP address should display, then connected.
If successful, turn off the main switch if you're not going to connect immediately.
App Install
Search the Google Play™ store for the apps; YRC Setting, Y-TRAC and CCU Config.
Install and accept all the default app choices – access to networks, to SD card, etc.
When the YRC Setting app is first launched after installation, you will get a prompt to download data from the bike.
Refer to the following sections for the Y-TRAC and CCU Config apps.
TIP
If you currently have settings on the bike you’d like to save, choose OK. If not, then choose Cancel.
* The last 6 characters will vary, this is determined by the specific MAC address of each CCU module.
Comments to this Manuals