Yamaha NEO'S YN50 Owner's Manual download pdf (Page 63)

2. Drain the carburetor float cham-

ber by loosening the drain bolt;

this will prevent fuel deposits

from building up. Pour the drai-

ned fuel into the fuel tank.

3. Fill up the fuel tank and add fuel

stabilizer (if available) to prevent

the fuel tank from rusting and the

fuel from deteriorating.

4. Perform the following steps to

protect the cylinder, piston rings,

etc. from corrosion.

a. Remove the spark plug cap

and spark plug.

b. Pour a teaspoonful of engine

oil into the spark plug bore.

c. Install the spark plug cap

onto the spark plug, and then

place the spark plug on the

cylinder head so that the

electrodes are grounded.

(This will limit sparking during

the next step.)

d. Turn the engine over several

times with the starter. (This

will coat the cylinder wall with

oil.) WARNING! To prevent

damage or injury from spar-

king, make sure to ground

the spark plug electrodes

while turning the engine

over. [EWA10951]

e. Remove the spark plug cap

from the spark plug, and then

install the spark plug and the

spark plug cap.

5. Lubricate all control cables and

the pivoting points of all levers

and pedals as well as of the

sidestand/centerstand.

6. Check and, if necessary, correct

the tire air pressure, and then lift

the scooter so that both of its

wheels are off the ground. Alter-

natively, turn the wheels a little

every month in order to prevent

the tires from becoming degra-

ded in one spot.

7. Cover the muffler outlet with a

plastic bag to prevent moisture

from entering it.

8. Remove the battery and fully

charge it. Store it in a cool, dry

place and charge it once a

month. Do not store the battery in

an excessively cold or warm pla-

ce [less than 0 °C (30 °F) or more

than 30 °C (90 °F)]. For more

information on storing the bat-

tery, see page 6-19.

TIP

Make any necessary repairs before

storing the scooter.

SCOOTER CARE AND STORAGE

7-4

7

5C2-F8199-E3 7/9/10 18:10 Página 51

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 71 72

Comments to this Manuals

No comments