Yamaha NEO'S YN50 Owner's Manual download pdf (Page 50)

The pivoting points of the front and

rear brake levers must be lubricated

at the intervals specified in the perio-

dic maintenance and lubrication

chart.

EAU23192

Checking and lubricating the

centerstand

1. Centerstand

The operation of the centerstand should

be checked before each ride, and the

pivots and metal-to-metal contact sur-

faces should be lubricated if necessary.

EWA11301

If the centerstand does not move up

and down smoothly, have a Yamaha

dealer check or repair it. Otherwise,

the centerstand could contact the

ground and distract the operator,

resulting in a possible loss of control.

EAU23272

Checking the front fork

The condition and operation of the

front fork must be checked as follows

at the intervals specified in the perio-

dic maintenance and lubrication

chart.

To check the condition

Check the inner tubes for scratches,

damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level surfa-

ce and hold it in an upright posi-

tion. WARNING! To avoid injury,

securely support the vehicle so

there is no danger of it falling

over. [EWA10751]

2. While applying the front brake,

push down hard on the handle-

bars several times to check if the

front fork compresses and

rebounds smoothly.

Recommended lubricant:

Lithium-soap-based grease

WARNING

Recommended lubricants:

Front brake lever:

Silicone grease

Rear brake lever:

Lithium-soap-based grease

PERIODIC MAINTENANCE AND ADJUSTMENT

6-17

6

5C2-F8199-E3 7/9/10 18:10 Página 38

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Comments to this Manuals

No comments