Yamaha NEO'S YN50 Owner's Manual download pdf (Page 19)

3. To change the minutes digits,

push the button for at least three

seconds.

4. When the minutes digits start

flashing, push the button to set

the minutes.

5. Push the button for at least three

seconds to start the clock.

TIP

After setting the clock, be sure to

push the button for at least three

seconds before turning the key to

“ ”, otherwise the clock will not be

set.

Odometer and tripmeter modes

Pushing the button switches the dis-

play between the odometer mode

“ODO” and the tripmeter “TRIP” in

the following order:

ODO 씮 TRIP 씮 ODO

If the fuel level warning indicator

comes on (see page 3-2), the odome-

ter display will automatically change

to the fuel reserve tripmeter mode

“TRIP F” and start counting the dis-

tance traveled from that point. In that

case, pushing the button switches the

display between the various tripmeter

and odometer modes in the following

order:

TRIP F 씮 ODO 씮 TRIP 씮 TRIP F

To reset a tripmeter, select it by pus-

hing the button, and then push it

again for at least three seconds. If you

do not reset the fuel reserve tripmeter

manually, it will reset itself automati-

cally and the display will return to the

prior mode after refueling and trave-

ling 5 km (3 mi).

TIP

The display cannot be changed back

to “TRIP F” after pushing the button.

Fuel gauge

The fuel gauge indicates the amount

of fuel in the fuel tank. The display

segments of the fuel gauge disappear

towards “E” (Empty) as the fuel level

RESET/

SELECT

RESET/

SELECT

RESET/

SELECT

RESET/

SELECT

RESET/

SELECT

INSTRUMENT AND CONTROL FUNCTIONS

3-4

3

5C2-F8199-E3 7/9/10 18:10 Página 7

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Comments to this Manuals

No comments