Yamaha V1.2 Owner's Manual download pdf (Page 39)

Wireless DCP Owner’s Manual

8. Troubleshooting

 Connection has been lost

Possible cause

• MTX processor is turned off.

• The smart device is out of Wi-Fi range.

• Connection is lost when the smart device is locked.

Action (for the iOS device)

Tap Reconnect to reconnect to the MTX processor, and continue

controlling it.

If this message occurs frequently, we recommend that you set the

iOS device’s auto-lock time to Never as described below.

1. Go to Settings on your iOS device.

2. Tap General.

3. Tap Auto-Lock and select Never.

 Not connected

Possible cause

• Another smart device is already connected to the selected MTX

processor.

• The smart device has become disconnected from the Wi-Fi

access point due to weak signal.

• The network settings are invalid.

• No Wireless DCP settings have been registered in any MTX pro-

cessor presets.

Action

Refer to Section 3.1 MTX Processor.

Eight smart devices running Wireless DCP can be connected to

each MTX processor.

1 2 ... 34 35 36 37 38 39 40 41 42

No comments

Yamaha V1.2 Owner's Manual Page 39