Yamaha E580 User Manual download pdf (Page 26)

2-1. PLAYING A SOURCE

1. Set the MASTER VOLUME control to minimum.

2. Turn the power on.

3. Select a source using the input selector on the integrated

amplifier etc.

* To select a tape deck connected to this unit’s TAPE terminals, turn

the TAPE MONITOR switch on so that the indicator over the switch

on the front panel lights up. (Otherwise, turn this switch off so that

the indicator goes off.)

NOTE: If this unit is connected to the TAPE terminals of the

integrated amplifier etc., the following operations are needed.

• If your amplifier has the REC OUT selector which is independent

of the input selector;

1.Set the input selector to the AUX position.

2.Select the source to be input to this unit using the REC OUT

selector.

• If your amplifier does not have the REC OUT selector which is

independent of the input selector;

1.Set the TAPE monitor switch on the amplifier to on.

2.Select the source to be input to this unit using the input

selector.

4. Play the source.

5. Increase the setting of the MASTER VOLUME control to your

listening level.

GENERAL OPERATION

POWER

Front Panel Remote Control

MASTER

VOLUME

—

Front Panel Remote Control

Front Panel

TAPE

MONITOR

TAPE

MON

Front Panel Remote Control

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

No comments

Yamaha E580 User Manual Page 26