Yamaha A100 User Manual download pdf (Page 5)

POWER AMPLIFIER

^lOO

SPECIFICATIONS

Input jacks:

Output connectors:

Functions:

Rated output:

Input sensitivity:

Voltage gain:

Frequency response:

Power bandwidth:

Total harmonic distortion:

intermodulation distortion:

Channel separation:

Signal to noise ratio:

Residual noise:

Slew rate:

Damping factor:

Input impedance:

Power requirement:

Power consumption:

Dimensions (W x FI x D):

Weight:

Standard Accessory:

Pin jack X 1/ch, Phone jack x 1/ch

4P push terminals

POWER switch, OUTPUT LEVEL controls, Level meters,

CLIP indicators, MODE switch (ST/MONO)

BOW + BOW (stereo, 1 % THD, 8 Ohm)

100W (BTL mono, 1% THD, 16 Ohm)

-10 dB (24B mV), (1 kHz,^B0W/8 Ohm, vol. max.)

38.2 dB (1 kHz, input-10 dB) ,

20 Hz — 20 kHz (0 + O.B dB)

10 Hz — BO kHz (0.2% THD, 2BW/8 Ohm)

0.02% (1 kHz, 2BW/8 Ohm, stereo)

0.2% (20 Hz — 20 kHz, 2BW/8 Ohm, stereo)

0.2% (70 Hz : 7 kHz = 4 : 1, 2BW/8 Ohm, stereo)

70 dB (1 kHz), 60 dB (20 Hz — 10 kHz)

10B dB (input shorted, IHF A)

-77 dB (vol. min., IHF A)

10 V/|j.sec. (full swing, 8 Ohm, stereo)

Grater 70 (1 kHz/8 Ohm), grater 60 (20 Hz — 20 kHz, 8

Ohm)

Grater 7.B kOhm

U.S Model: AC 120 V 60 Hz

General Model: AC 220/240 V BO/60 Hz

U.S Model: 120 W

General Model: 120 W

220 X 96 X 296 mm

(8-11/16" X 3-3/4" X 11-B/8")

4.6 kg (10 lbs. 2 oz)

Operation manual

0 dB = 0.77B V rms

Specifications and design are subject to change without notice.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

Yamaha A100 User Manual Page 5

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Yamaha A100