Yamaha RX-V659 Manual download pdf (Page 94)

SET MENU

• “CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”,

“PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP”

(see page 87), “SUR. L/R SP” (see page 87), “SUR. B L/R SP”

(see page 87), “LFE/BASS OUT” (see page 88) and

“PRESENCE SP” (see page 87) are set to “NONE”

respectively.

• Instead of “SB L” and “SB R”, “SUR. B” is displayed if “SUR.

B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 87).

■ Center graphic equalizer D)EQUALIZER

Use this feature to select the parametric equalizer or the

graphic equalizer.

Equalizer select EQ TYPE SELECT

Use this feature to select the type of equalizer.

Choices: AUTO PEQ, CENTER GEQ, EQ OFF

• Select “AUTO PEQ” to use the parametric equalizer

adjusted in “AUTO SETUP” (see page 32).

• Select “CENTER GEQ” to adjust the built-in 5-

frequency band graphic equalizer for the center speaker

so that the tonal quality of the center speaker matches

that of the front left and right speakers.

• Select “EQ OFF” to deactivate the equalizing feature.

• “AUTO PEQ” is automatically selected when you run “AUTO

SETUP” (see page 32).

• If you press u / d while “CENTER GEQ” is selected, the

OSD changes to the following screen.

Center graphic equalizer CENTER GEQ

When you select “CENTER GEQ” in “EQ TYPE

SELECT”, use this feature to adjust the built-in 5-

frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz)

graphic equalizer for the center channel so that the tonal

quality of the center speaker matches that of the front left

and right speakers. You can make adjustments while

listening to the currently selected source component or a

test tone.

Control range: –6.0 to +6.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

Press u / d to select a frequency band and j / i to adjust the

selected frequency band.

Test tone TEST

Use this feature to make adjustments of “CENTER GEQ”

while listening to a test tone.

Choices: OFF, ON

• Select “OFF” to stop test tones and output the currently

selected source component.

• Select “ON” to output test tones from the front left and

center speakers, and adjust the tonal quality of the

center speaker.

Notes

EQ TYPE SELECT

CENTER GEQ

D)EQUALIZER

 / : CT GEQ

[<]/[>]:Select

.TEST>OFFON



100Hz ;;;;;; 0dB

300Hz ;;;;;; 0dB

1kHz ;;;;;; 0dB

3kHz ;;;;;; 0dB

10kHz ;;;;;; 0dB

[]/[]:Up/Down

[<]/[>]:Adjust

D)EQUALIZER

-______+

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 131 132

Comments to this Manuals

No comments

Yamaha RX-V659 Manual Page 94

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V659