Yamaha RX-V659 Manual download pdf (Page 92)

SET MENU

Bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE

(low-frequency effect) and the low-frequency signals.

Choices: SWFR, FRNT, BOTH

• Select “SWFR” (subwoofer) if you connected a

subwoofer. The LFE signals as well as the low-

frequency signals of other speakers set to “SML” (or

“SMALL”) or to “NONE” are directed to the

subwoofer.

• Select “FRNT” (front) if you did not connect a

subwoofer. The LFE signals, the low-frequency signals

of the front left and right channels, and the low-

frequency signals of other speakers set to “SML” (or

“SMALL”) or to “NONE” are all directed to the front

left and right speakers regardless of the “FRONT SP”

setting (see page 86).

• Select “BOTH” (both) if you connected a subwoofer.

The low-frequency signals of any source are output

from the subwoofer. The LFE signals as well as the

low-frequency signals of other speakers set to “SML”

(or “SMALL”) or to “NONE” are directed to the

subwoofer. The low-frequency signals of the front left

and right channels are directed to the front left and

right speakers and the subwoofer regardless of the

“FRONT SP” setting (see page 86).

Crossover CROSS OVER

Use this feature to select a crossover frequency of all the

speakers set to “SML” (or “SMALL”) or to “NONE” in

“SPEAKER SET” (see pages 86 and 87). All frequencies

below the selected frequency will be sent to the subwoofer

or to the speakers set to “LRG” (or “LARGE”) in

“SPEAKER SET” (see pages 86 and 87).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,

120Hz, 160Hz, 200Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if

bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

• Select “NORMAL” if you do not want to reverse the

phase of your subwoofer.

• Select “REVERSE” to reverse the phase of your

subwoofer.

Presence/Surround back channel priority

PRIORITY

Use this feature to prioritize either the presence or the

surround back speakers when playing sources that contain

surround back channel signals using the CINEMA DSP

sound field programs.

Choices: PRch, SBch

• Select “PRch” to use the presence speakers even when

surround back channel signals are input. The signals

for the surround back channel will be output from the

surround speakers.

• Select “SBch” to use the surround back speakers when

a surround back channel signals is detected in a

CINEMA DSP program. The presence channel signals

are output from the front speakers.

SWFRFRNT>BOTH

LFE/BASS OUT

FREQ;;;80Hz

CROSS OVER

>NORMALREVERSE

02ASUBWOOFER PHASE

PRch >SBch

PRIORITY

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 131 132

Comments to this Manuals

No comments

Yamaha RX-V659 Manual Page 92

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V659