Yamaha RX-V590RDS Owner's Manual download pdf (Page 33)

English

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit, the batteries are weak. Replace both

batteries with new ones.

Notes

●

Use only AA, R6, UM-3 batteries for replacement.

●

Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

●

Remove the batteries if the remote control transmitter will

not be used for an extended period of time.

●

If batteries leak, dispose of them immediately. Avoid

touching the leaked material or letting it come in contact with

clothing, etc. Clean the battery compartment thoroughly

before installing new batteries.

Remote control transmitter operation range

Notes

●

There should be no large obstacles between the remote

control transmitter and the main unit.

●

If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid direct

lighting.

30°

STANDBY mode

While the power is on, pressing the POWER key on the remote

control transmitter switches the unit to the STANDBY mode. (In

this mode, the indicator is half illuminated.)

POWER on mode STANDBY mode

Remote control

sensor

Within approximately

6 m (19.7 feet)

1 2 ... 28 29 30 31 32 33 34 35 36

No comments

Yamaha RX-V590RDS Owner's Manual Page 33