Yamaha HTR-3063 User Manual download pdf

Firmware Update Procedure for RX-V367/HTR-3063

Page.1 of 5

May, 2010

Subject: RX-V367/HTR-3063 Firmware Update Version C022

Yamaha is pleased to offer the following firmware update to ensure the best possible

performance and features for your Yamaha RX-V367/HTR-3063 AV Receiver. This

firmware adds 3D video pass-through capability for the HDMI connections.

Requirements:

 A personal computer capable of burning an audio CD

 BD/DVD/CD player* with digital audio connection

(Optical or Coaxial, not HDMI)

*Note

CD PLAYER IS PREFERRED.

Some DVD players use digital filters, which affects the output signal of the

devices. This firmware update may not work with DVD players which use these

digital filters. CD players usually do not use these filters.

CHECK THE UNIT’S FIRMWARE VERSION PRIOR TO THIS UPDATE

The firmware version consists of a letter followed by three numbers [ex. “C022”].

If the three numbers in the firmware version are 022 or higher, you DO NOT need to

perform this update.

How to check your firmware version:

Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you

press the [STANDBY/ON] button. Once the front panel displays "ADVANCED SETUP",

release the [STRAIGHT] button. Then, press and hold the [TONE CONTROL] button for

about 3 seconds until front panel display shows the firmware version.

The following pages contain the firmware update instructions for Yamaha AV receivers

RX-V367/HTR-3063. The outline of the update is as follows:

1. Create an update disc (Audio CD)

2. Connect digital audio with CD, DVD or BD player

3. Enter firmware update mode

4. Play the update disc (Reprogramming)

5. Confirm update firmware version

< IMPORTANT NOTICE >

Do not attempt to update your Yamaha receiver using any other data file except those provided

directly from the Yamaha website.

Follow the instructions carefully and do not attempt any other procedures not specified in the

instructions provided by Yamaha.

Improperly updated products may cause improper operation, and any parts or service required

to restore proper operation will not be covered under the Yamaha Limited Warranty.

1 2 3 4 5

Summary of Contents

Page 1 - Page.1 of 5

Firmware Update Procedure for RX-V367/HTR-3063 Page.1 of 5 May, 2010 Subject: RX-V367/HTR-3063 Firmware Update Version C022 Yamaha is pleased t

Page 2 - Page.2 of 5

Firmware Update Procedure for RX-V367/HTR-3063 Page.2 of 5 Instructions for Firmware Update: STEP1 CREATE UPDATE DISC Download the firmware from Y

Page 3 - Page.3 of 5

Firmware Update Procedure for RX-V367/HTR-3063 Page.3 of 5 STEP3 ENTER FIRMWARE UPDATE MODE Plug the AC power cable of the AV rec

Page 4 - Congratulations!

Firmware Update Procedure for RX-V367/HTR-3063 Page.4 of 5 STEP5 CHECK UPDATED VERSION Press and hold the [STRAIGHT] button on the front panel and

Page 5 - IN CASE OF ERROR

Firmware Update Procedure for RX-V367/HTR-3063 Page.5 of 5 IN CASE OF ERROR Case1 Display on the receiver “CDDA Upgrader” doesn’t change after pla

Yamaha HTR-3063 User Manual

Browse online or download User Manual for Receiver Yamaha HTR-3063. Subject: RX-V367/HTR-3063 Firmware Update [en]

Summary of Contents

More documents for Receiver Yamaha HTR-3063

Comments to this Manuals

Yamaha HTR-3063 User Manual

Browse online or download User Manual for Receiver Yamaha HTR-3063. Subject: RX-V367/HTR-3063 Firmware Update [en]

Summary of Contents

More documents for Receiver Yamaha HTR-3063

Comments to this Manuals

Related products and manuals for Receiver Yamaha HTR-3063