Yamaha RX-V367 Owner's Manual download pdf (Page 43)

En 43

SETUP

Setting various functions (Setup menu)

■

Goes enter standby mode automatically

when you leave it without operating

If you do not operate this unit or use the remote control for an

extended period of time, it will automatically go into standby mode

(Auto Power Down function). This function’s default setting is

“Off.” When you wish to activate this function, set the amount of

time to pass before this unit will enter standby.

■

Setting the brightness of the front panel

display

Sets the brightness of the front panel display. Lowering the setting

dims the display.

Setting sound field program parameters

You can set the parameters for the sound field programs (☞p. 44).

Prohibiting setting changes

Prohibits setting changes to prevent careless changes being made

to the settings on Setup menu.

AutoPowerDown

Off (Default) Auto Power Down function is disabled.

4hours Goes into standby mode, when you have not operated

this unit for four hours.

8hours Goes into standby mode, when you have not operated

this unit for eight hours.

12hours Goes into standby mode, when you have not operated

this unit for twelve hours.

This unit starts a countdown of 30 seconds before entering the

standby mode. Pressing any key of the remote control during the

countdown cancels entering the standby mode and reset the

timer.

Dimmer

Adjustable range -4 to 0

Default setting 0

Off (Default) Settings are not protected.

On Prohibits changes to the settings on Setup menu until

it is returned to “Off.”

While set to “On,” the unit displays “Memory

Guard!” when an attempt is made to change the

settings.

SL SR

DSPParameter

SETUP

VOL .

SL SR

Memory Guard

SETUP

VOL .

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 60 61

Comments to this Manuals

No comments

Yamaha RX-V367 Owner's Manual Page 43

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V367