Yamaha RX-V3300 Owner's Manual Page 74
- Page / 95
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
70
SET MENU
13 DISPLAY SET
■ DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
■ OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Press + to lower the position of the OSD.
Press – to raise the position of the OSD.
■ GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
Choices: AUTO, OFF
Initial setting: AUTO
Note
• If “GRAY BACK” is set to OFF, no information will be
displayed on the screen when video signals are not being input.
■ V CONV. (Video conversion)
Use this feature to turn on/off the function to convert
composite signals to S-video signals to output through the
S-video jack when no S-video signals are input.
Choices: ON, OFF
Initial setting: OFF
OFF
Select this not to convert composite signals to S-video
signals.
ON
Select this to convert composite signals to S-video
signals.
13 DISPLAY SET
OSD SHIFT………………0
≥ DIMMER………………………0
GRAY BACK………AUTO
V CONV.………………OFF
12 SP DELAY
MAIN L/R……10.0ft
CENTER…………10.0ft
REAR L/R……10.0ft
≥ UNIT……………………feet
REAR CT…………7.0ft
■ Setting by “msec”
Control range: 0 to 5.0 ms (for center), 0 to 30.0 ms
(for rear center)
Initial settings: 0 ms (for center), 3.0 ms (for rear
center)
■ Setting by “meters”
Control range: 0.15 to 30.00 m (for main L/R,
center, rear L/R, rear center)
Initial settings: 3.00 m (for main L/R, center, rear L/
R), 2.10 m (for rear center)
■ Setting by “feet”
Control range: 0.5 to 100 ft (for main L/R, center,
rear L/R, rear center)
Initial settings: 10.0 ft (for main L/R, center, rear L/
R), 7.0 ft (for rear center)
Note
• No delay will be set if the same distance is set for the main L/R
and center, or the rear L/R and rear center with “meters” or
“feet” selected.
12 SP DELAY
CENTER……………0.0ms
REAR CT…………3.0ms
≥ UNIT……………………msec
12 SP DELAY
MAIN L/R………3.00m
CENTER……………3.00m
REAR L/R………3.00m
≥ UNIT………………meters
REAR CT…………2.10m
0109V3300_60-74_EN(UA) 02.7.24, 6:07 PM70
- RX-V3300 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- CAUTION II 3
- III CAUTION 4
- CONTENTS 5
- FEATURES 6
- GETTING STARTED 7
- CONTROLS AND FUNCTIONS 8
- Remote Control 10
- Using the Remote Control 11
- Front Panel Display 12
- Rear Panel 13
- SPEAKER SETUP 14
- Speaker Placement 15
- Connecting the Speakers 16
- COMPONENT VIDEO 17
- ■ IMPEDANCE SELECTOR switch 18
- CONNECTIONS 19
- Connecting Audio Components 22
- Connecting the Antennas 24
- Connecting to an External 25
- Amplifier 25
- Connecting to the 6CH INPUT 25
- ■ AC OUTLET(S) (SWITCHED) 26
- Turning on the Power 27
- ON-SCREEN DISPLAY (OSD) 28
- SPEAKER MODE SETTINGS 29
- TEST DOLBY SUR 30
- Before You Begin 30
- 3 Press –/+ repeatedly to 31
- 4 When the adjustment is 31
- TEST DSP 32
- BASIC PLAYBACK 33
- Input Modes and Indications 35
- 1 Set 10KEY/DSP to DSP on 36
- Selecting PRO LOGIC 37
- PRO LOGIC or Neo: 6 37
- Front panel 38
- Remote control 38
- Understanding Sound Fields 39
- Hi-Fi DSP Programs 39
- CINEMA-DSP 39
- Sound Field Effect 40
- Straight Decode 40
- Features of DSP Programs 41
- Automatic and Manual Tuning 45
- Presetting Stations 46
- A :AM 630 kHz 47
- C3:AM 630 kHz 47
- 2,41,31,3 48
- BASIC RECORDING 49
- REMOTE CONTROL FEATURES 50
- Setting the Manufacturer Code 51
- Learn Feature 52
- Display Window 53
- Using the Macro Feature 54
- ■ Operating the macro 55
- ■ Programming a macro 55
- Clearing Learned Functions 56
- Macros, Renamed Source Names 56
- Clearing a Macro Function 57
- Clearing a Learned Function 57
- Each Component Control Area 59
- SAT area) 60
- PARAMETER 64
- SET MENU 64
- 1 SPEAKER SET (speaker mode 65
- 1C REAR L/R SP 66
- ■ 1E LFE/BASS OUT (bass out 67
- ■ 1D REAR CT SP (rear center 67
- 1G MAIN LEVEL 68
- 2 LOW FRQ TEST 69
- 3 L/R BALANCE (balance of the 69
- 6 INPUT RENAME 70
- 5 CENTER GEQ (center graphic 70
- 7 I/O ASSIGNMENT 71
- 9 PARAM. INI (parameter 72
- 10 LFE LEVEL 72
- 8 INPUT MODE (initial input 72
- 11 D-RANGE (dynamic range) 73
- 12 SP DELAY 73
- 13 DISPLAY SET 74
- 14 MEMORY GUARD 75
- 15 6CH INPUT SET 75
- 16 ZONE2 SET 76
- SP OUT…………………OFF 76
- ≥ OUTPUT VOL……VAR 76
- 1 Set PARAMETER/SET 77
- SLEEP TIMER 78
- Zone 2 Connections 79
- Remote Control in Zone 2 80
- What Is a Sound Field? 81
- 60 dB 60 dB 60 dB 85
- TROUBLESHOOTING 87
- ■ Remote control 91
- GLOSSARY 92
- SPECIFICATIONS 94
Related products and manuals for Receiver Yamaha RX-V3300
Receiver Yamaha DSP-AZ1 Owner's Manual
(110 pages)
(110 pages)
Receiver Yamaha R-V905 Owner's Manual
(69 pages)
(69 pages)
Receiver Yamaha RX-V495 Manual
(65 pages)
(65 pages)
Receiver Yamaha HTR-5950SL User Manual
(2 pages)
(2 pages)
Receiver Yamaha RX-V771 User Manual
(2 pages)
(2 pages)
Receiver Yamaha RX-V1065 Owner's Manual
(88 pages)
(88 pages)
Receiver Yamaha R-N301 User Manual
(3 pages)
(3 pages)
Receiver Yamaha HTR-5440 Owner's Manual
(69 pages)
(69 pages)
Receiver Yamaha RX-V465 Owner's Manual
(76 pages)
(76 pages)
Receiver Yamaha RX-V575 Setup Guide
(8 pages)
(8 pages)
Receiver Yamaha DDP-10 Owner's Manual
(31 pages)
(31 pages)
Receiver Yamaha RX-Z9 Manual
(130 pages)
(130 pages)
Receiver Yamaha R-V1105 Manual
(80 pages)
(80 pages)
Receiver Yamaha YHT-1096AU User Manual
(2 pages)
(2 pages)
Receiver Yamaha HTR-3063 Owner's Manual
(66 pages)
(66 pages)
Receiver Yamaha HTR-5130 Manual
(52 pages)
(52 pages)
Receiver Yamaha ISX-800 Owner's Manual
(92 pages)
(92 pages)
Receiver Yamaha R-V905 Manual
(69 pages)
(69 pages)
Receiver Yamaha CRX-N560 Owner's Manual
(90 pages)
(90 pages)
Receiver Yamaha RX-V795aRDS Owner's Manual
(88 pages)
(88 pages)
© 2020, manymanuals.com. All rights reserved. | 2.067 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals