Yamaha RX-V3300 Owner's Manual download pdf (Page 38)

BASIC PLAYBACK

■ Normal Stereo Reproduction

Press STEREO/EFFECT to turn off the sound

effect for normal stereo reproduction.

Press STEREO/EFFECT again to turn the sound

effect back on.

Notes

• If “1B MAIN SP” on the SET MENU is set to “SMALL” and

“1E LFE/BASS OUT” is set to “SWFR”, or “1E LFE/BASS

OUT” is set to “BOTH”, the LFE signals will be output from

the subwoofer.

• If you turn off the sound effect while a Dolby Digital or DTS

signal is being output, the dynamic range of the signal is

automatically compressed and the sounds of the center and rear

speaker channels are mixed and output from the main speakers.

• The volume may be greatly reduced when you turn off the

sound effect or if you set “11 D-RANGE” on the SET MENU

to MIN. In this case turn on the sound effect.

■ Displaying the information about

the input source

During the stereo reproduction, you can display the

information such as the type, format and sampling

frequency of the signal input from the component

connected to this unit.

(During playback)

1 Set PARAMETER/SET

MENU to PARAMETER.

2 Press k/n to display the information about

the input signal.

Notes

• The DTS 96/24 decoder and the DTS ES decoder cannot be

activated at the same time while playing the DTS 96/24 signal.

When “AUTO” is selected, the DTS 96/24 decoder has

precedence over the DTS ES decoder.

• 6.1-channel playback is not possible even if EX/ES is pressed

in the following cases:

– When “1C REAR L/R SP”is set to “NONE”.

– When the sound effect is turned off.

– When the source connected to the 6CH INPUT jack is

being played.

– When the source being played does not contain rear L/R

channel signals.

– When Dolby Digital KARAOKE source is being played.

– When headphones are connected.

– When “8ch Stereo” is selected.

• When the power of this unit is turned off, the input mode

will be reset to AUTO.

■ Virtual CINEMA DSP

With the Virtual CINEMA DSP, you can enjoy all the

DSP programs without rear speakers. It creates the virtual

speakers to reproduce the natural sound field.

The sound field processing is changed to the Virtual

CINEMA DSP mode according to the selected DSP

program by setting “1C REAR L/R SP” on the SET

MENU to NONE.

Notes

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR L/R SP” is set to NONE in the following cases:

– when the 8ch Stereo, DOLBY DIGITAL Normal, Pro Logic

Normal, Pro Logic , DTS Normal or Neo: 6 program is

selected;

– when the sound effect is turned off;

– when 6CH INPUT is selected as the input source;

– when using the test tone; or

– when connecting the headphones.

• When over 48 kHz sampling digital signal is being input, this

unit reproduces sound in the virtual CINEMA DSP mode after

converting the sampling frequency to 48 kHz or below.

■ SILENT CINEMA DSP

You can enjoy the powerful sound field as if there were

actual speakers with the SILENT CINEMA DSP. You can

listen to SILENT CINEMA DSP by connecting your

headphones to the PHONES jack while the digital sound

field processor is on. Enjoy all the DSP program using the

headphones. The “SILENT” indicator lights up on the

front panel display. (If the sound effect is off, you listen to

the source with normal stereo reproduction.)

Notes

• When 6CH INPUT is selected as the input source, this unit is

not set in the SILENT CINEMA DSP mode even if the sound

effect is on.

• When over 48 kHz sampling digital signal is being input, this

unit reproduces sound in the CINEMA DSP mode after

converting the sampling frequency to 48 kHz or below.

STEREO

EFFECT

STEREO

EFFECT

Front panel

Remote control

PARAMETER

SET MENU

PARAMETER

SET MENU

LEVEL

ON SCREEN

TESTSLEEP

0105V3300_29-34_EN(UA) 7/26/02, 5:49 PM34

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 94 95

Comments to this Manuals

No comments

Yamaha RX-V3300 Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for Receiver Yamaha RX-V3300