Yamaha R-V905 Owner's Manual download pdf (Page 24)

SPEAKER BALANCE ADJUSTMENT

This procedure lets you adjust the sound output level balance between the main, center and rear speakers using the built-in test

tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from

each speaker. This is important for the best performance of the digital sound field processor, the Dolby Digital decoder and the

Dolby Pro Logic Surround decoder.

The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.

After completing the adjustment of the output level for each speaker, use VOLUME (

) on the remote control transmit-

ter at your listening position to check if the adjustments are satisfactory.

Set the SELECTOR DIAL to the AMP/TUN or DSP position

on the remote control transmitter.

1 Set VOLUME to the “∞” position.

Front panel

2 Turn the power on.

Front panel Remote control

3 Select the main speakers to be used.

Front panel

* If you use two main speaker systems, press both A and B.

5,9

2 1

4,74

01RX-V595-e/f2 6/23/99, 4:10 PM24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 68 69

No comments

Yamaha R-V905 Owner's Manual Page 24