Yamaha R-V905 Owner's Manual download pdf (Page 19)

English

How to connect

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are

faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –

markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could

damage this unit and/or speakers.

For connecting to the MAIN SPEAKERS

terminals

Red: positive (+)

Black: negative (–)

1 Unscrew the knob.

2 Insert the bare wire.

[Remove approx. 5 mm

(1/4”) insulation from the

speaker wires.]

3 Tighten the knob and

secure the wire.

1 Press the tab.

2 Insert the bare wire.

[Remove approx. 5 mm

(1/4”) insulation from

the speaker wires.]

3 Release the tab and

secure the wire.

For connecting to the REAR and CENTER

SPEAKERS terminals

Red: positive (+)

Black: negative (–)

Banana plug connections are also possible (except for

Singapore model). Simply insert the banana plug connector

into the corresponding terminal.

01RX-V595-e/f2 6/23/99, 4:09 PM19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 68 69

No comments

Yamaha R-V905 Owner's Manual Page 19