Yamaha YSP-1000 Owner's Manual download pdf (Page 46)

BEAM MODE

Outputs sound beams from the front left and right and

center speakers. This mode is ideal for enjoying movies

with the whole family. Because the listening position area

is widened, you can enjoy excellent quality surround

sound over a wider area.

Press 3BEAM on the remote control to select the

3 beam mode.

You can achieve a more realistic surround effect if you adjust

settings for IMAGE LOCATION in BEAM MENU (see page 74).

• When you play back multi-channel sources, surround left and

right signals are mixed down and output from the front left and

right speakers.

• The front left and right sound beams are output towards the

walls in your listening room.

Outputs sound beams from the front left and right

speakers in the 2-channel stereo mode. This mode is ideal

for playing back hi-fi sources, such as CDs, and can be

used to replace your TV speakers.

Press STEREO on the remote control to select

the stereo mode.

• When you play back multi-channel sources, all signals except

those for the front left and right speakers are mixed down and

output from the front left and right speakers. No audio is output

from the center and rear channels.

• The surround mode becomes disabled when the stereo mode is

selected.

• When you play back Dolby Digital audio signals in the stereo

mode, the dynamic range becomes compressed. If the volume

level decreases to the extreme, use other beam modes except the

target mode.

• If the stereo mode is selected as the beam mode, the surround

modes (see page 46) and the CINEMA DSP programs (see

page 51) become ineffective.

3 beam mode

Notes

3BEAM

Stereo mode

Notes

STEREO

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 101 102

No comments

Yamaha YSP-1000 Owner's Manual Page 46