Yamaha V1 Manual download pdf (Page 4)

PM1D Manager for Windows Operating manual

■

If a digital I/O card (MY card) is assigned

■

If 2TR IN is assigned

■

If the output of an effect return is assigned

■

If a GEQ output is assigned

Digital gain can be used to adjust the input sensitivity in

a range of +10 dB– –20 dB (the knob will not turn any

further to the right beyond –20 dB).

Only in the case of the digital gain for an input channel,

you can also use the [GAIN] encoder of the CS1D's

INPUT block to adjust the setting. In this case as well,

the adjustable range for the input is +10 dB– –20 dB (the

knob will not turn any further to the right beyond –20

dB). Internally, the input sensitivity is adjusted in a gain

range of –10 dB to +20 dB. If you want a digital source to

be input at nominal level, set the GAIN knob in the

screen to 0 dB.

If a mic/line input card (LMY2-ML) is assigned to

an input channel/insert input, the screen will show

an analog gain knob (range: +10 dB– –68 dB), just

as in the previous software version.

If TB (talkback) is assigned to an input channel/

insert input, the input level will be adjusted by the

panel TALKBACK [LEVEL] volume, just as in the

previous software version.

Digital gain

GAIN

-68+10

GAIN

-68+10

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

Yamaha V1 Manual Page 4