Yamaha V1 Manual download pdf (Page 7)

BALANCE control for input channels/ST IN channels

■

VARI type MIX bus

If a VARI type MIX bus is paired, the PAN parameter of

the MIX bus will change to a BALANCE parameter. (A

BAL knob will be displayed instead of a PAN knob in the

PAN/ROUTING function CH to MIX screen.)

In this case, the signal of the odd-numbered input chan-

nel will be sent only to the odd-numbered MIX bus, and

the signal of the even-numbered input channel will be

sent only to the even-numbered MIX bus. The BAL

knob will adjust the volume of the two signals in tan-

dem.

In addition, if the VARI PAN LINK button is on for

either of these two channels, the MIX bus BAL knob will

be linked with the STEREO bus BAL knob. If you oper-

ate either BAL knob of the STEREO bus or MIX bus, the

remaining three BAL knobs will operate in tandem.

Hint

Even if the BALANCE button is on, the signal that is

sent from those input channels to a VARI type MIX

bus will not be affected unless the MIX bus is paired.

■

FIX type MIX bus

If the FIXED MIX PAN button is on for either of the two

channels whose PAN MODE is set to BALANCE, the sig-

nal that ﬂows from the corresponding input channel

through the BALANCE parameter will be sent to the FIX

type MIX bus. At this time, the signal of the odd-num-

bered input channel will be sent only to the odd-num-

bered MIX bus, and the signal of the even-numbered

input channel will be sent only to the even-numbered

MIX bus.

BAL knob

MIX 1 (VARI)

MIX 2 (VARI)

BALANCE

INPUT CHANNEL 1

INPUT CHANNEL 2

STEREO L

STEREO R

INPUT CHANNEL 1

INPUT CHANNEL 2

BALANCE

STEREO L

STEREO R

MIX 1

MIX 2

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Yamaha V1 Manual Page 7

Comments to this Manuals