Yamaha PZ50MTX Owner's Manual download pdf (Page 38)

Control functions

ESU11033

Adjusting the control rods (PZ50VT)

WARNING

EWS00770

The left and right adjusting nuts must be

set to the same position. Uneven settings

can cause poor handling and loss of sta-

bility.

The weight transfer can be adjusted by turn-

ing the adjusting nuts on the control rods.

1. Loosen the locknut while holding the ad-

justing nut.

2. To increase weight transfer, turn the ad-

justing nut in direction (a), and to de-

crease weight transfer, turn it in direction

(b). WARNING! Never adjust the con-

trol rods beyond the maximum set-

ting, indicated by red paint; otherwise,

they could be damaged, which could

lead to an accident or injury.

[EWS00173]

1. Compression damping force adjusting

screw

Compression damping force setting:

Minimum (soft):

20 click(s) in direction (b)*

Standard:

11 click(s) in direction (b)*

Maximum (hard):

1 click(s) in direction (b)*

* With the adjusting screw fully turned in

direction (a)

1. Locknut

2. Control rod adjusting nut

U8GK12E0.book Page 32 Monday, May 19, 2008 11:17 AM

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 97 98

No comments

Yamaha PZ50MTX Owner's Manual Page 38